Windows 10: Reset failed to initiate.

Trying to reset my PC on the settings > recovery > reset however when I click on reset it does nothing but restart. It actually comes with nothing then as if it like I just restarted the PC since its doing so fast and no buffering or no initialization at all. I want to reset this PC since I want it new and I will give it to my husband. Help.

:)

 

Windows 10 fails to update


When you finish testing the Avast suggestion, make sure that you restart your machine.

Then if the issue persists, please return to the trouble shooting list in post# 89

I think there are three steps that remain; the WU troubleshooter, reset WU components, and manual WU reset.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

bl initialize library failed 0xc0000bb

Let's try to use system restore instead. Follow the steps below:

• 
  Start your desktop, and after the manufacturers logo disappears and Windows 10 tries to boot, press and hold the power button for 5-10 seconds to perform a hard shut
  down.
  
  
  
• 
  Do the step #1 until you see the Windows logo screen or Please wait during boot. (You
  may need to perform this up to 3 times.)
  
• 
  After Windows 10 boots into the Windows 10 Recovery Environment (WinRE), you can now access Startup
  Recovery, Safe Mode, and Command Prompt.
  
• 
  Go to Troubleshoot > Advanced Options > System Restore,
  and then check if you have a restore point.
  
• 
  In the list of available restore points, choose the date prior to the issue. Steps can be found in this article on
  how to perform a System Restore. Refer to Restore from a system restore point.
  

If the steps above fails, we suggest that you boot your computer in Safe Mode (while in the Recovery Environment) and see if it helps. Follow the steps below on how
to boot in Safe Mode:

• 
  Go to Troubleshoot > Advanced Options > Startup Settings and click Restart.
  
• 
  Upon restart, click/press 4 to boot into Safe Mode.
  

If Safe Mode does not work, we may need to Reset your computer. Follow the steps below:

• 
  Go to Troubleshoot > Advanced Options > Reset this PC.
  
• 
  Choose to keep all your files and applications. This will re-install Windows 10 whilst keeping your data and applications.
  

Update us after you perform the steps.