Windows 10: Reset PC ( getting things ready )

So I've been trying to reset my pc 3 times now and they all failed for some reason the third try it's taking a bit longer getting things ready. Do I just shut down and turn it back in again?.

:)

 

Stucked on "Getting things ready"

I tried to reset and clean all my data from my PC with windows 10. After choice the option on recovery my PC spend many hours in the message "Getting things ready, this won`t take so long". It`s normal?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

I can't get past getting a few things ready

So my automatic repair failed and i tried to reset my pc, i chose to keep my files and i waited over night to get past getting things ready but I can't.