Windows 10: Restart - Automatic repair system & Diagnosing your PC

After using the DISM restore health cmd prompt, whenever I restart my PC it boots up showing the ACER logo with the automatic repair system screen, then transitions to "diagnosing your PC", until prompting me to restart my computer due to "Failing to restart the computer." When I click restart, it boots normally, but this issue is troubling me whenever I have to restart. When I shutdown my computer and boot it up again however this does not happen.


Does anyone know how to fix this, or if it's safe to disable automatic repair system in the case that my computer is actually fine?

I'm using Windows 10 64x bit on the Nitro AN515-53.


Any help is appreciated!

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Preparing Automatic Repair/Diagnosing Your PC Loop

Hi,

To resolve your concern with continuously looping your system, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.

 

Startup Issue "Preparing Automatic Repair" "Diagnosing your PC"

Hi Greg.

I turned off my laptop many times and every time I turn on my laptop it displays "Preparing Automatic Repair" then after a minute it will "Diagnosing you PC"
then displays Automatic Repair (Your PC did not restart correctly) then I click restart, then it will finally boot now.

That's the process every time I open my laptop.