Windows 10: restore monitor

default monitor settings

:)

 

Restore window issue in Window 10 1903 when extra Monitor

Hi,



Thank you for writing to Microsoft Community Forums.



To have a better clarity on the issue and guide you accordingly, kindly help us with the following information:

• Is the issue specific to DBeaver or does it happen on all the applications?

The issue could probably be because of the secondary monitor not having its own taskbar. I suggest you to try the steps listed below and check if it works.

• Right click the Taskbar on your primary monitor and choose Taskbar Settings.
• Enable Show Taskbar on all the displays under
  Multiple Displays, and exit Settings.
• Now, try restoring a minimized window to see if it works.

Regards,

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Restoring Windows 10 Image using Macrium Reflect


In addition to the above. Here's my suggestion in step by step.
I assume you have Macrium Installed in your current HD and already made a backup copy.

1. Connect your new HD via USB port and boot up.
2. Run Macrium, click on Restore tab then select the Backup Image that you made to restore
3. click on "select a different target disk" then select your new HD as destination
   
   
   
4. Proceed to restore then Shutdown and disconnect the old HD and replace with the new HD
5. Boot up with your new HD.