Windows 10: Router does not work on Laptops

Hi, my router works fine with every device but laptops. If I connect any windows laptop to the Wi-Fi , the overall speed of the internet drops by a lot Almost 0 for every device .

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Need new Router

Doesn't your ISP has a list of suggested routers? If not, look for 802.11 AC Wireless routers.

 

Laptop overclocking adventures

hey guys I'm trying to get clockgen to work on my laptop but can't get any of the plls to work, can you please post like exactly what steps I need to take to test each pll to see if it works? my specs are listed to the left
thanks!