Windows 10: Run into a BSOD error

I have runned into a bsod error


I have win 10 on my desktop. It happened suddenly while watching a video. Automatic repair tried but no success. Cannot boot up PC.

Tried safe mode or all the 9 different option present there, still no success.


Here is a list what I am getting as error:

MEMORY MANAGEMENT

KMODE EXCEPTION NOT HANDLED

SYSTEM PTE MISUSE

IRQL NOT LESS OR EQUAL

KERNAL SECURITY FAILURE

0x000098 WINLOAD.EXE

0xc0000221 NTOSKRNL.EXE

0xc0000225 WINLOAD.EXE

SYSTEM THREAD EXCEPTION NOT HANDLED

BOOTMGR IMAGE IS CORRUPTED

THE SYSTEM CANNOT BOOT

ACPI.SYS FAILED

NETIO.SYS FAILED

CRITICAL PROCESS DEAD

BAD POOL CALLER

VOLMGR.SYS FAILED

SYSTEM SERVICE EXCEPTION


That is all till now. Now what have I tried , I tried to use USB Bootable drive with trying to repair with command prompt with commands:

Bootrec/fixmbr

Bootrec/fixboot

Bootrec/rebuildbcd

first two were successful nut rebuildbcd prompted for a particular file to add to installation , I have tried all Yes All and No option but none of them working. I have tried chkdsk C:/r no bad sectors found.


Thanks for reading and I kindly request to provide me with solution


Thanks and regards

Alok

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile