Windows 10: Sabertooth 990FX PCI16 Constant RED CPU light, No HDMI, working monitor on other computer,...

Disconnected 250GB crucial drive with Windows 10 from a Sabertooth 990FX to use in newer computer because Samsung EVO 870 failed after less than 3 years, got a 250gb fanxiang drive for the newer computer operating system.I had another 2TB drive on the Sabertooth but I had a second install of windows on that drive but HDMI turned off on the boot after I used it to put windows 10 on a usb for the newer pc because the windows 11 media creation tool wasn't working on my newer motherboard. Installed windows 10 on the fanxiang in the newer computer and I am using that currently.Put the 250gb cruci

:)

 

Night Light not working on Monitor with USB to HDMI adapter

Hello,

I am using a Dell Micro 3070 with 3 monitors. One monitor is plugged into the HDMI port, the other 2 monitors use HDMI cables with an HDMI to USB adapter. The Night Light setting works on the monitor plugged directly into the HDMI port but not on the monitors using the adapters. Is this by design or is there a way to make the Night Light function work on all 3 monitors?

Thank you.

 

Computer All Of A Sudden Won’t Boot - Red CPU Debug Light ON

I have tried all I could at this point, from loading defaults, to bios flash ( blinks 3 red lights before stopping, tried numerous times to no avail ). And it won’t even let me update bios as loading into M Flash needs the PC to reset which ends up turning it off, not letting it load up again due to red CPU light appearing once more. It literally loads up sometimes and allows me to use it like I could before, then after restarting goes back to red CPU debug light. At first I thought it was the motherboard over all the other parts, now i’m second guessing for the PSU ( 600w Bronze EVGA ) as CPU may not be getting enough power to boot ? no clue at this point, also do not have spare parts to test PC so that’s out of the picture. Aside from that I have tried pretty much everything listed above plus more, I will write it down below in case anyone views this and types a suggestion I have tried. reset CMOS ( battery & jump start ) flash BIOS ( only 3 lights flashed ) reset CPU reapplied thermal paste replaced CMOS battery tested ram sticks reset GPU set bios to default double checked all cables and parts are not loose Thank you to everyone who wrote a suggestion.

 

HDMI no output after update to FullHD monitors

Hello

My system:

• AMD Graphics Card
  • GPU : 912-V308-001 (or) R9 290X GAMING 4G
• Desktop mid tower
• Operating System Windows 10 64bit Update 1709
• Video Driver version installed AMD Radeon Adrenalin Edition 17.12.2 Drivers
• Display Devices that does not work with HDMI :
  • BenQ - GL2450HM 24.0" 1920x1080 60Hz
  • AOC M2470SWH 23.6" 1920x1080 60Hz
  • Philips 243V7QDAB/00 24'' 1920x1080 60Hz
  • AOC - G2460VQ6 24.0" 1920x1080 75Hz Monitor (currently using with Display port, does not work with HDMI)
    • The HDMI port works with 4k tv so I know it is functional.
• Motherboard Asus - SABERTOOTH Z97 MARK2 ATX LGA1150 BIOS Version 2702
• CPU Core i5-4690K
• Power Supply Unit Corsair - Builder 750W CX750 or CP-9020015-EU
• RAM 16GB

Issue:

• One morning after regular updates my graphics card stopped sending signals to HDMI monitors that are bellow the resolution of 4k. The monitors, just shows no signal, when you uninstall the drivers sometimes, like once in 4 times it will catch
  the monitor, but if you restart the PC you will again get no signal. The monitors works perfectly with my laptop on HDMI. 3 Of the monitors are fresh from the box. The HDMI port works perfectly with my 4k TV. Tried switching 7 HDMI cables total. Reinstalled
  windows twice, video drivers several times. Currently using a display port for one of the monitors.