Windows 10: SafeNet Sentinel usb hardware key Kernel-PnP/Device Configuration error id 400 id 410 id...

Hi everyoneMy design software FlexiDesigner, can't access the USB SafeNet Sentinel Dual Hardware Key since yesterday morning the 29th Jan.A simple reboot fixed it for an hour, then Flexi lost contact with the key again & nothing has fixed it.No Windows updates installed this week, last one on the 12 Jan 2024.In event viewer, Errors, ID 400, ID 410, ID 411, ID 420, ID 430 come up on the Hardware Key & error 411 on Intel USB 3.20....Do not know if the Intel USB error was there before, Any help is very appreciated, LarsReboots after every line.Windows 11 updatedAsus motherboard Tuff H670

:)

 

USB drive seen by Device Mgr but not This PC - Event ID 441/Kernel-PnP


Hello from London, and thank you in advance for any advice that helps save my life.

I recently upgraded a Dell Latitude E6400 (old, I know) to Windows 10 and (eventually) optimized for performance. Since the HDD in this laptop is only 75GB I stored most of my data on a Seagate 210GB USB2.0 drive. It was working perfectly for the year I've had it (and the two weeks since Windows10 install) and then a few days ago it can no longer be read by either of my two laptops (the other running Win7).

Device manager shows the drive, but it doesn't show up in This PC. I had also pinned it to the start menu and Quick Access. It has disappeared from the start menu and has a ? in front of the old drive allocation in Quick Access.

Summary of properties by tab:

1. General - Seagate USB 2.0 Cable USB Device / Device Status - This device is working properly
2. Policies - quick removal
3. Volumes - initially blank (dashes), clicked Populate, and the following, highly troubling data populated
Disk Disk 2
Type Unknown
Status Not initialized
Partition Not Applicable
Capacity 2097152 MB
Unallo Sp 0 MB
Rsrvd Sp 0MB
4. Driver - tried uninstalling and reinstalling, reinstalls most current driver each time but with same error (Event ID 441/Kernel-PnP)
5. Details - Disk drive
6. Events - same 3 events occurring every time I try to access the drive: a) device started (disk), b) device configured (disk.inf), and c) device not migrated. The information field reports that "

Device USBSTOR
\Disk&Ven_Seagate&Prod_USB_2.0_Cable&Rev_0148\2HC015KJ70 could not be migrated.

Last Device Instance Id: USBSTOR
\Disk&Ven_&Prod_USB_DISK_2.0&Rev_PMAP
\0701426E31B2DE40&0
Class Guid: {4D36E967-E325-11CE-BFC1-08002BE10318}
Location Path:
Migration Rank: 0xF000FC001001F120

When clicking on All Events I see that four things happen repeatedly:
1. !Error, Source: Kernel-PnP, Event ID-441
2-4. Information, K-PnP, 400, 410, & 420

I have screenshots of the XML and Friendly View data as well but hope that this is enough to determine if I will ever see my data again. It was my main hard drive and all of the documents that I need are there and inaccessible. Ironically I discovered this problem as I brought a 3TB drive home to be a master backup of everything.

What I've tried so far:

1. Ran cmd/admin and unhid nonpresent devices, deleted all i didnt need, rebooted, no change
2. Uninstalled driver and Seagate drive and restarted. Plugged in USB which installed the same (current) driver with no change in any of the above. Three attempts.

Any other suggestions sincerely appreciated!

Thank you,

Douglas

 

Pnp device instance id

Hi,

I was reading about drivers and PNP, and i was wondering- does the instance-specific-ID is in case sensitive?

<device-ID>\<instance-specific-ID>

I have an id:

\VEN_10B7&DEV_9905&SUBSYS_110210B7&REV_02\4&19d8fe94&0&00F0

and it contains both lowercase and uppercase letters in the instance-specific-ID part. Does it matter?

Thanks, Dor

 

Microphone (High Definition Audio Device) Error: Kernel-PnP Event ID 441

Could someone help explain what this error means:

Microphone (High Definition Audio Device)

Error: Kernel-PnP Event ID 441.

I have no Playback sound or Recording sound.

Cortana cannot speak or hear me.

I am posting this question to: Cortan & search.

Thank you