Windows 10: Samsung SSD 980cot initialize there is no option to allow it! What can I do to fix this?

I purchased a new Samsung SSD 980 from a world class manufacturer but Windows 11 will not even initialize it to let me format it. I find out after purchaseing and trying to get the product to work that many people with Windows 11 report the sme problem.

:)

 

Win10 clean install on Samsung SSD 850 EVO

BLUF: SSD is not listed ubder "Where do you want to install Windows?"

Steps Complete:

1. I've create a Win10 bootable install usb.

2. I connect the new Samsung SSD 850 EVO via SATA.

3. I reboot PC and verify SSD is seen by the motherboard/BIOS

4. Begin Win10 install via usb.

5. Get to "Where do you want to install Windows?" and the SSD is not listed

Problems:

1. Samsung does not offer a driver for the 850 on their website

2. Cannot locate driver elsewhere

Unsuccessful Mitigations Steps Attempt:

A. Format & partition SSD via Windows Disk Management, then retried steps 1-5 above....same result

B. Clone existing HHD onto SSD via "Image for Windows" by TeraByte, then verified SSD contents via Windows Explorer....similar result

Can you please offer some advice on locating a driver for a Samsung SSD 850 EVO 1TB drive? Or an alternative method?

Thank you

 

SSD samsung evo and amd drivers

Hi,

Thank you for writing to Microsoft Community Forums.

The issue could be because of the AMD drivers installed on the computer.

Since the Samsung SSD is working fine with the Microsoft AHCI driver, I suggest you to update the AMD driver and check if that helps. To update the AMD drivers follow the steps from the article

Update drivers in Windows 10.

If updating the drivers didn’t help, I suggest you to roll back the driver to previous build and check if that helps. To roll back the driver to previous build follow the steps mentioned below:

1. Press and hold the Windows + X key on the keyboard.
   
2. Select Device manager.
   
3. In Device manager, expand IDE ATA/ATAPI controllers.
   
4. Right click on AMD SATA Controller and select
   Properties.
   
5. Navigate to the Driver tab and click on Roll Back Driver.
   
6. Restart the computer.
   

Hope it helps.

Nikhar Khare

Microsoft Community - Moderator

 

2 x SSD Raid 0 - is this right?

T ski b4 your done with this post can you list a step by step fix of what you did, I would appreciate it if you would...Thanks