Windows 10: samsung xpress m2070w printer

After upgrade windows 7 to windows 10 I fail to scan direct scan by pressing scanner button to my PC. My printer with scanner model Samsung xpress m2070w

:)

 

samsung m2020w printer

Hello Joseph,

Your printer will display as "offline" if it can't communicate with your PC. Check to make sure the printer is turned on and connected to the same Wi-Fi network as your PC. To find out if your printer is connected to Wi-Fi, see if your printer's
built-in menu has options for checking, or check the printer's manual for specific
instructions.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

1. Press Windows key + R, then type in
   winver.
2. Click OK.

• Were there any recent changes made prior to this issue?

Also, make sure that you've installed the latest driver of your printer and
try to download and install the Samsung Easy Wireless Setup to
help you configure and properly connect your printer wireless.

If the issue still occurs, I'd recommend checking this article
to troubleshoot printer issues in Windows 10.

Looking forward to your response.

Regards.

 

Printer won't print.


Is this any help? How To Reset A Samsung Xpress M2070, 2070F, 2070FW Printer

 

Printer won't print.


About a month ago I bought a laser printer. It's a Samsung Xpress Multifunction M2070W. Starting today it will not print. I know the reason as a message comes up saying "Out of toner." I believe that there is still toner in it. This printer (and I'm sure most printers) have a chip that counts the number of pages and when it gets to that number it assumes it's out of toner. I very seldom print a full page and some pages have only a few lines. I called Tech. Support at Samsung and they said that there is a work-around. I talked to 3 different people but didn't understand them as how to do it. I have somewhat of a hearing problem and cannot understand anyone who has an accent. They were all very nice and tried to help but I thanked them and had to give up. My question is: Would anyone know what the work-around may be? Thank you for your help.