Windows 10: SATA SSD doesn't work as boot up drive

Discus and support SATA SSD doesn't work as boot up drive in Windows 10 Gaming to solve the problem; Hello i recently bought a Kingston nvme SSD and put it in my pc in bios it shows up as SATA port 0 but doesn't seem to be seen in boot order priorities... Discussion in 'Windows 10 Gaming' started by Nicocokoko, Mar 10, 2023.

  1. NICOCOKOKO
    Nicocokoko Win User

    SATA SSD doesn't work as boot up drive


    Hello i recently bought a Kingston nvme SSD and put it in my pc in bios it shows up as SATA port 0 but doesn't seem to be seen in boot order priorities When i boot up windows on a m.2 nvme SSD it shows up in windows but i can't boot up windows on it . I don't know what to do and I'm very frustrated . Thanks

    :)
     
    Nicocokoko, Mar 10, 2023
    #1
  2. BETOLP
    BetoLP Win User

    Windows doesn`t start. Authomatic repair doesn`t work.

    Thanks again!!

    I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

    I`ll do it and I`ll be updating this thread when I have the report.

    - - - Updated - - -

    I ran SeaTools. These are the results:

    SATA SSD doesn't work as boot up drive 233722d1557862791t-windows-doesn-t-start-authomatic-repair-doesn-t-work-hdd-test-1-.png


    Does it mean my HDD is useless?
     
    BetoLP, Mar 10, 2023
    #2
  3. DAVEM121
    DaveM121 Win User
    New SSD wont boot

    Hi John

    Boot into BIOS, is SATA Mode set to AHCI to enable booting from an SSD drive?

    Is the SSD drive set a top of the Boot Priority list?

    Did you try connecting that SSD to the SATA Port normally used by your old HDD?
     
    DaveM121, Mar 10, 2023
    #3
  4. MARKGRANT4
    MarkGrant4 Win User

    SATA SSD doesn't work as boot up drive

    can I move the boot from a sata drive to SSD

    can I move the boot from a sata drive in the same pc external SSD in windows 8.1?
     
    MarkGrant4, Mar 10, 2023
    #4
Thema:

SATA SSD doesn't work as boot up drive

Loading...

  1. SATA SSD doesn't work as boot up drive - Similar Threads - SATA SSD doesn't

  2. ssd sata wont boot with windows

    in Windows 10 Gaming
    ssd sata wont boot with windows: im using windows 10 yesterday i acquired a new ssd m2 i installed it but after boot the windows wont boot, after checking bios i can see all my storage disks two m2 ssd, one hdd but i cant see the sata ssd with windows on and my pc wont boot, it says bootable device not...

  3. ssd sata wont boot with windows

    in Windows 10 Software and Apps
    ssd sata wont boot with windows: im using windows 10 yesterday i acquired a new ssd m2 i installed it but after boot the windows wont boot, after checking bios i can see all my storage disks two m2 ssd, one hdd but i cant see the sata ssd with windows on and my pc wont boot, it says bootable device not...

  4. ssd sata wont boot with windows

    in Windows 10 BSOD Crashes and Debugging
    ssd sata wont boot with windows: im using windows 10 yesterday i acquired a new ssd m2 i installed it but after boot the windows wont boot, after checking bios i can see all my storage disks two m2 ssd, one hdd but i cant see the sata ssd with windows on and my pc wont boot, it says bootable device not...

  5. SATA SSD doesn't work as boot up drive

    in Windows 10 Software and Apps
    SATA SSD doesn't work as boot up drive: Hello i recently bought a Kingston nvme SSD and put it in my pc in bios it shows up as SATA port 0 but doesn't seem to be seen in boot order priorities When i boot up windows on a m.2 nvme SSD it shows up in windows but i can't boot up windows on it . I don't know what to do...

  6. Windows only boots up if the SSD drive is on SATA port 2. UEFI's boot setup does not show...

    in Windows 10 Ask Insider
    Windows only boots up if the SSD drive is on SATA port 2. UEFI's boot setup does not show...: Issue: Perfectly functioning machine if SSD drive is connected to the SATA port 2 (3rd port): All the drives show up, function, etc. but if try to move it to port 0 (or any other port) on the motherboard, I get an error on bootup that the OS drive can't be found and I get a...

  7. Set up second SATA SSD as Linux boot drive?

    in Windows 10 Installation and Upgrade
    Set up second SATA SSD as Linux boot drive?: I have a 10-year-old HP H8-1070t PC (BIOS AMI 7.09 7/2/2011) running Windows 10 Pro v. 2004 build 19041.985. It has two SATA SSD's, SATA1 assigned as C: (Windows boot drive), and SATA0 as D: (data). System info says the BIOS is in UEFI mode. The BIOS's boot page lists the...

  8. Issues with SSD and SATA drives

    in Windows 10 Network and Sharing
    Issues with SSD and SATA drives: Hello,I have two issues regarding my two hard drives. One is an HDD with 2 TB and the other is an SSD with 1TB.This is the first time I have had a computer with more than one drive, so when I tried to copy all of my files, programs, user data, etc. over, I went a bit haywire...

  9. Cloned M.2 Boot SSD to Sata SSD, How do I boot to the cloned drive?

    in Windows 10 Support
    Cloned M.2 Boot SSD to Sata SSD, How do I boot to the cloned drive?: My Windows is Windows 10 Pro Version 1909. I have a Western Digital SN750 M.2 NVME SSD. It has my Windows 10 Installation and a Data Partition. I recently bought a Samsung 960 Evo which is a Sata SSD. They are both 1 TB. I used the Samsung Data Migration Tool to Clone my...

  10. Unable to boot after cloning Sata HDD to Sata SSD

    in Windows 10 Installation and Upgrade
    Unable to boot after cloning Sata HDD to Sata SSD: Hello, I did cloning of my original Sata 1 TB HDD to New 1 TB SSD (WD) using Macrium Software. No issues found during cloning and everything went fine. I did swap the hard disk and when I turn on the laptop I am unable to boot to windows. I did try legacy boot option and...