Windows 10: SAW is not recognized as a SAW, how can I set my SAW as a SAW, this screenshot is taken on...

This screenshot is taken on my SAW and speaks for it self, this message should not appear!!When I want to control my remote device from my SAW I will get this message: !!!!!How can I set my SAW to a SAW so that Mouse Without borders recognizes my SAW as a SAW?

:)

 

hole saws

I just used my 3 inch hole saw tonight on my side panel. I put a 80mm fan square in the middle of the side panel. Make sure to tape up every bit of the painted surface. One little section left uncovered/taped may find a lone metal shaving scratching the paint. Yes, put a piece of word under the piece to be cut, if possible. The drill likes to catch and kick so I make sure I tape the side panel to the scarp wood and then tape it to something nice and solid that I can grip with my calves while I am drilling sitting in a chair. I tape the surface, use the fan grill I will be using as a placement and template to make the 4 corner holes. X marks the spot for the hole saw. I drill from the outside in. If there are burs, and there usually is, I prefer them on the inside to file/cut off. I chose to use a 3"/76mm hole saw and it works great imo. I think the next step up is a 83mm hole saw and I don't want to risk not having enough material left between the hole and the 4 screw holes. The 4 1/2", 114mm hole saw would work great for a 120mm fan opening, imo.

The hole saw is the way to go if you want a nice clean and Round hole. I wouldn't even think of using a roto zip. I'd probably loose a finger or trash my case in the attempt.

 

Jig Saw Puzzles

Hi Lorain, well it still crashed. Both Jig Saw Puzzle and Solitaire crashed on me. I have not tried Word Search yet.

 

The Jig Saw Puzzle

The Jig Saw Puzzle comes and goes. Sometimes all the puzzles are there and other times just one might up