Windows 10: scanner not working

My scanner wont let me scan document How do i fix?

:)

 

Epson 1200 scanner now working! Very pleased.


Worked perfectly,

• Installed 2400 series driver (when it asked what model I had I also picked, 1270 and 4180 since these had the Slide scanner interface I thought it might add a few extra drivers)
• Restarted PC
• Needed to use Device manager 'Updated driver'
• Assign 2400 driver. (See attached image)
• Be sure scanner is powered on so it appears in device manager.

Tested the Slide scanner attachment, I used PRO mode and it was discovered.
I had to use the plastic blackout slide holder (for masking the slide) to find the slide though.



Hope this helps others, Thanks again for the step by step!

 

Fingerprint Scanner Not Working

Hello Gary,



Thank you for posting on Microsoft Community.

To resolve this issue try the following steps:

• 
  Have you updated the driver for the Finger Print scanner? If not, check on the manufacturer’s website (HP).
  
• 
  Check if installing the latest driver of the fingerprint scanner allows you to login using a Microsoft Account?
  

This issue might occur due to driver incompatibility since upgrading to Windows 10.



If you have the raw executable file of the corresponding driver for the validity sensor, I would suggest you to install the downloaded driver file in compatible mode with Windows 7 or 8. Refer to the following steps to do so.

• 
  Right click on the driver, and click on Properties.
  
• 
  Go to the Compatibility tab.
  
• 
  Check the box for Run this program in compatibility mode for:
  
• 
  Select Windows 7 in the list of Operating systems.
  
• 
  Click OK.
  
• 
  Double-click the driver file to install the driver and follow the onscreen instructions.
  
• 
  Reboot your computer.
  

Hope the above steps help.



Thank you.

 

Microtek scanner on Win 10 Pro

Hi Jean,

To get better clarity on the issue, kindly answer the questions below:

• Is the scanner detected under Devices?
• Were you able to see the scanner on the Device Manager?
• Have you installed the latest driver for the scanner?

We suggest you to run the troubleshooter for hardware and devices. To do this, follow the steps:

• On the Start menu, type Troubleshooting and hit enter.
• Choose Hardware and Sound.
• Select Hardware and Devices and run the troubleshooter.

If issue persists, we suggest you contact the manufacturer to get better assistance.

Do let us know if you need further assistance.