Windows 10: Scanner

Please can you help me setting up my Scanner? The printer is working but the scanner is not working. Both printer and scanner are combined Can you help me? Thanks!

:)

 

Microtek scanner on Win 10 Pro

Hi Jean,

To get better clarity on the issue, kindly answer the questions below:

• Is the scanner detected under Devices?
• Were you able to see the scanner on the Device Manager?
• Have you installed the latest driver for the scanner?

We suggest you to run the troubleshooter for hardware and devices. To do this, follow the steps:

• On the Start menu, type Troubleshooting and hit enter.
• Choose Hardware and Sound.
• Select Hardware and Devices and run the troubleshooter.

If issue persists, we suggest you contact the manufacturer to get better assistance.

Do let us know if you need further assistance.

 

Scanner

Hi JSmith,

Your scanner should be installed first in order for your computer to recognize it. Since you're using a printer/scanner in one, you need to add or install the device as a printer and as a scanner. Make sure that the printer is properly connected to your
computer and is turned on when you try to install it. Follow these steps:

• Click Start > Settings > Devices.
• Under Add printers & scanners, click the + sign and select
  Add device.

Once added, try checking if you're able to scan. If your computer still doesn't detect the scanner, then we suggest that you get in touch with HP Support for further assistance.

Feel free to let us know if you need more information.

Regards.

 

Fingerprint Scanner Not Working

Hello Gary,



Thank you for posting on Microsoft Community.

To resolve this issue try the following steps:

• 
  Have you updated the driver for the Finger Print scanner? If not, check on the manufacturer’s website (HP).
  
• 
  Check if installing the latest driver of the fingerprint scanner allows you to login using a Microsoft Account?
  

This issue might occur due to driver incompatibility since upgrading to Windows 10.



If you have the raw executable file of the corresponding driver for the validity sensor, I would suggest you to install the downloaded driver file in compatible mode with Windows 7 or 8. Refer to the following steps to do so.

• 
  Right click on the driver, and click on Properties.
  
• 
  Go to the Compatibility tab.
  
• 
  Check the box for Run this program in compatibility mode for:
  
• 
  Select Windows 7 in the list of Operating systems.
  
• 
  Click OK.
  
• 
  Double-click the driver file to install the driver and follow the onscreen instructions.
  
• 
  Reboot your computer.
  

Hope the above steps help.



Thank you.