Windows 10: Screen display does not fill screen. What can I do to reverse this.

Display does not fill screen - only about 3/4. This has happened before and I know it was a simple fix but don't remember what it was. ANYONE, anyone ? Thanks

:)

 

screen display

Hi William,

It is important that you have the correct screen display and resolution. We suggest that you perform the following steps to reset the monitor settings:

• Boot your computer in
  safe mode.
• Once in safe mode, right-click the desktop > Screen Resolution.
• Change the display settings back to the original configuration.
• Restart your computer.

Feel free to update us on the result.

 

Laptop with broken screen How much?

I would like suggestions and look in local stores. I dont wanna buy a laptop from someone online. Sorry. But could be a good idea if you asked him about the performance on older games. Gonna make a list ofall laptops people suggest me.

Remove the screen for space purpose here its small desk and if the screen is opened it will hide my 22 inches lcd

 

My screen became reversed from left to right after installing windows


@Link99, I'm afraid your problem is more serious than a simple mirror-reversal of the screen. I've looked closely at your photo of the two screens. At the small scale there is a lot more going on. Individual vertical strips (probably 4 pixels wide) are NOT mirrored. Within each strip the pixels are displayed in the right order. It is the order of these vertical strips that has been reversed. You can see this clearly in these two snips from your photo. The first is your monitor, the second is the laptop's screen. Note that part of the curve of the capital G is clearly the correct way round on the laptop.







This suggests to me that a hardware fault is the root cause. The address lines that index the horizontal pixel locations are not working correctly. This also suggests that the fault is not in display adapter, some small comfort there. Rather it is somewhere between that and the pixels on the screen. It is possible that an incorrectly seated cable connecting the two could be the problem, but my diagnosis is that it's more likely to be a hardware fault in the screen itself. You may have to replace your screen, I'm afraid.