Windows 10: Secure System Maxing Out Ram

Hello,I've been running into an issue with the Secure System task maxing out my ram and when I try to end the process or process tree it tells me "Access is Denied" even though I am the only admin as it's my personal rig. Even went through the process of swapping out my ram and reinstalling windows both 10 and 11, any thoughts?Thank you,

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Office And Light Gaming Build

There's nothing wrong with the build, but I have some suggestions to, IMHO, make it better:

• You list a 550 watt PSU, but you have a 51 watt CPU and a GPU that pulls 120 watts at the max. In other words, your system will pull under 200 watts at maximum load, which it sounds like will be rarely. PSU's are most efficient between 50-80%, and even at max load, this system won't reach 50%. Suggest a PSU 400 watts or less, like the Seasonic G-360.
• RAM's really cheap. Suggest getting 16 GB instead.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin