Windows 10: Security kernel BSOD ntoskrnl.exe BCC 0x00000139

Hey guys I have been getting a blue screen about once a week while doing anything from gaming to just idling at the desktop. I can't seen to figure out what's going on so some help would be appreciated!

Thanks

Attachment 149491

:)

 

Windows 10 BSOD - SYSTEM_SERVICE_EXCEPTION (win32kbase.sys+4d8be)

Another BSOD.. I just turned on the computer went into Intel control panel to disable adaptive brightness and suddenly everything turned off and BSOD appeared, but somehow there's no reason visible in BlueScreenView, it was something with
Kernel Security Check Failure...

This time in BlueScreenView there is only one file highlighted - ntoskrnl.exe

Minidump https://onedrive.live.com/redir?resid=C28B2580DA30693!452&authkey=!AOgPyxYtrVWdLEE&ithint=file,dmp

Some other details:

0x00000139

00000000`00000003

ffffd000`8b97f750

ffffd000`8b97f6a8

00000000`00000000

ntoskrnl.exe

ntoskrnl.exe+142770

I have bad experience with Driver Verifier when I last time ran it...

 

BSOD (Blue screen error) on Windows 10 PC.

Original Title: BSOD

010216-10078-01.dmp

2.1.2016. 14:35:34

0x00000139

00000000`00000021

ffffd000`209ea5d0

ffffd000`209ea528

00000000`00000000

ntoskrnl.exe

ntoskrnl.exe+142760

NT Kernel & System

Microsoft® Windows® Operating System

Microsoft Corporation

10.0.10586.17 (th2_release.151121-2308)

x64

ntoskrnl.exe+142760

C:\Windows\Minidump\010216-10078-01.dmp

4

15

10586

134.716

2.1.2016. 14:36:01

I need help with bsod
i repeatedly get this error

 

Hi JassonPerez57 ,

There were many bsod noted but only 1 mini dump file.
This 1 file when debugged did not display a definitive misbehaving driver.
The settings on Ccleaner need to be checked to make sure that they were not deleted.
There were some problems noted with the drive.
Windows failed fast startup.
Windows failed to update.


Open command prompt and type the following commands:
1) sfc /scannow
2) dism /online /cleanup-image /restorehealth

3) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

4) perform windows updates and post any failed KB# and error code
5) turn off windows fast startup:
Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials

6) use a one drive or drop box share link to post a memory dump file: %SystemRoot%\MEMORY.DMP
or C:\Windows\MEMORY.DMP

7) open ccleaner > windows tab > system > un-check memory dump

8) run one of the SMART tests on your drives:

a) CrystalDiskInfo - Software - Crystal Dew World:
Download Center - Crystal Dew World
CrystalDiskMark - Software - Crystal Dew World
Software - Crystal Dew World


b) HD Tune: HD Tune website


c) Hard Disk Sentinel - HDD health and temperature monitoring: Hard Disk Sentinel - HDD health and temperature monitoring


When the SMART test has completed open the Microsoft snipping tool and make images of the results to post into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials


Check the health,
scan for errors, no quick scan but full scan
run a benchmark.


It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
the health,
the error scan,
the benchmark incl. following
transfer rate,
access time,
burst rate,
cpu usage.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials

9) Run Sea tools for windows on your drive using SMART, short and long generic tests:


How to use SeaTools for Windows
http://www.seagate.com/support/downl...ls-win-master/
How to use SeaTools for Windows
http://www.seagate.com/support/downloads/seatools/


10) open administrative command prompt and type or copy and paste:
chkdsk /x /f /r
Post the results of the chkdsk into the thread:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials

11) find a flash drive that you can format
12) create a bootable windows 10 iso: Download Windows 10


Code: Event[1664]: Log Name: System Source: disk Date: 2016-10-11T20:53:54.697 Event ID: 51 Task: N/A Level: Warning Opcode: N/A Keyword: Classic User: N/A User Name: N/A Computer: JassonPC Description: An error was detected on device \Device\Harddisk1\DR3 during a paging operation.[/quote] Code: Event[8499]: Log Name: System Source: Microsoft-Windows-StartupRepair Date: 2017-02-22T19:25:09.965 Event ID: 1002 Task: N/A Level: Information Opcode: Info Keyword: N/A User: S-1-5-18 User Name: NT AUTHORITY\SYSTEM Computer: JassonPC Description: Startup Repair failed.[/quote] Code: Event[8392]: Log Name: System Source: volmgr Date: 2017-02-22T18:52:46.931 Event ID: 46 Task: N/A Level: Error Opcode: N/A Keyword: Classic User: N/A User Name: N/A Computer: JassonPC Description: Crash dump initialization failed![/quote] Code: Event[9944]: Log Name: System Source: volmgr Date: 2017-03-17T22:28:41.029 Event ID: 45 Task: N/A Level: Error Opcode: N/A Keyword: Classic User: N/A User Name: N/A Computer: JassonPC Description: The system could not sucessfully load the crash dump driver.[/quote] Code: Windows failed fast startup with error status 0xC00000D4.[/quote] Code: Event[26983]: Log Name: System Source: Microsoft-Windows-WindowsUpdateClient Date: 2017-08-18T16:38:20.386 Event ID: 20 Task: Windows Update Agent Level: Error Opcode: Installation Keyword: Installation,Failure User: S-1-5-18 User Name: NT AUTHORITY\SYSTEM Computer: JassonPC Description: Installation Failure: Windows failed to install the following update with error 0xC1900107: Feature update to Windows 10, version 1703.[/quote]