Windows 10: Seems to be a lot of BOOT LOOPING happening as of recent.

Not sure what the go is.Yet there seems to be a lot of BOOT LOOPING going on.At times the issue seems to be associated with recent Updates.Seems to be a random issue across many different PC setup.Leaving people confused as to how to recover from it.As i have suffered same issue had to find a work around to enter the Windows Recovery Environment WinRE.The quickest way i found without having to let the computer boot loop 3 times "OR" having to manually restart the computer 3 times adding to power downs and ups.HOLD DOWN THE "SHIFT KEY" and whilst continuing to HOLDING DOWN the SHIFT KEY using

:)

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Boot loop

Hi Terri,

This issue occurs when there are broken components on the boot configuration data of your system. To troubleshoot your boot loop issue, we suggest that you boot in
safe mode through the Windows
Recovery Environment option. To do this, follow these steps:

• Turn on your computer. When the Windows logo appears, unplug and replug the device. Perform these steps three times.
• On the fourth instance, turn on your device without unplugging it. The Windows Recovery Environment window will appear.
  
• On the Choose an option screen, click Troubleshoot.
• Click Advance options.
• Click Startup Settings.
• Click Restart.
• Once your computer restarts, you will see a list of options. Press the F4 key to start your computer in
  safe mode.
  

Once done, we suggest that you perform a system restore after booting in safe mode. System Restore will be able to revert your PC or laptop to their previous state, which can be used to repair and recover system malfunctions or issues. Restoring won’t affect
your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. To do this, follow the steps below:

1. Right-click the Start button, and then select
Control Panel.

2. Search Control Panel for
Recovery.

3. Select Recovery > Open
System Restore > Next.

4. Choose the restore point related to the problematic
app, driver, or update, and then select
Next > Finish.

Feel free to post back if you need further assistance.