Windows 10: Self Test Feature Check

Need help... I replaced my monitor cable with a longer one today and now instead of my monitoring going blank after a certain amount of time I get this message that floats around on my screen - "self test feature check" and it displays the colors red, green, blue and white in boxes. Anyone know what causes this and how to get rid of it? Thanks....

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Touch interface self test and Touch internal self test is showing failled ..

Test name:

Touch internal self test

Test description:

The test verifies internal functionality of touch module.

Result:

MINOR

Result (detailed view):

Failed loading the driver

Data description:

Detailed result contains HwFails bitmask. Zero means all was ok, and fail codes are:

- SELF_TEST_HW_FAIL_CONTROL 0x0001 (no communication with a device at all)

- SELF_TEST_HW_FAIL_INTERRUPT 0x0010.

Method description:

Build-in selftest for touch sensor network verification is run where RAW values of the sensor network are read and they are verified to be within the specified limits. The touch screen should not be pressed during the selftest.





AND



Test name: Touch interface self test

Test description: The test verifies data and control lines between MCM and touch controller.

Result: MINOR

Result (detailed view): Failed loading the driver

Data description: Detailed result contains HwFails bitmask. Zero means all was ok, and fail codes are: - SELF_TEST_HW_FAIL_CONTROL 0x0001 (No communication with a device at all) - SELF_TEST_HW_FAIL_BIST 0x0004 (Component internal self test) - SELF_TEST_HW_FAIL_INTERRUPT
0x0010 (Interrupt line fails)

Method description: Touch driver identifies controller by reading of the test register via control interface. Interrupt is generated for INT line verification by setting the threshold low enough.

 

SMART extended self test failed

hi i ran the short drive self test and it passed. the long generic test failed but there isnt a fix option. please help