Windows 10: Sensor problems

Hello,I have fujitsu r726. My sensors seems like they are not working.I've updated the drivers, system, downloaded sesnor explorer it shown 100% packetloss and no data for sensors.Also I've turned off rotation block function and enabled autorotation.Please help me with the issue.

:)

 

Way to disable proximity sensor?

Why does my Nokia Lumia's screen turn black when in a call? - Nokia FAQ



Your Nokia Lumia phone has a proximity sensor located on the upper part of the front side. When you are in a call the proximity sensor turns off the touch screen to prevent accidental presses. Any object cover the sensor may cause
detection.

You can take the following steps to check the issue:

• Make or receive a call with the phone.
• Once the phone is in a call place your hand 1cm above the screen and display will turn off.
  
• Remove your hand from above the proximity sensor area and display shall turn back on.
  
• Repeat the test steps 1,2,3 for 3 times to verify the proximity sensor function.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

Sensor Problem - GPU-Z Readings on Sapphire HD4870

Except we have screenshots of other 4800 series cards that have data from additional sensors. The Sapphire card I have also only has three led's compared to four for the original version of the card. Rather than red only and normally off, they're green and normally on. I think it must have been a change in the layout of the card itself and apparently specific to Sapphire, at least so far, rather than say a new stepping of the GPU