Windows 10: Setting up all-in-one as scanner.

My PC recognizes my Canon MX920 All-in-One as a printer but not as a scanner. I have the setup CD, but I can't get through the scanner setup wizard. Not sure if I'm doing something wrong or not.

:)

 

Scanner

Hi JSmith,

Your scanner should be installed first in order for your computer to recognize it. Since you're using a printer/scanner in one, you need to add or install the device as a printer and as a scanner. Make sure that the printer is properly connected to your
computer and is turned on when you try to install it. Follow these steps:

• Click Start > Settings > Devices.
• Under Add printers & scanners, click the + sign and select
  Add device.

Once added, try checking if you're able to scan. If your computer still doesn't detect the scanner, then we suggest that you get in touch with HP Support for further assistance.

Feel free to let us know if you need more information.

Regards.

 

Microtek scanner on Win 10 Pro

Hi Jean,

To get better clarity on the issue, kindly answer the questions below:

• Is the scanner detected under Devices?
• Were you able to see the scanner on the Device Manager?
• Have you installed the latest driver for the scanner?

We suggest you to run the troubleshooter for hardware and devices. To do this, follow the steps:

• On the Start menu, type Troubleshooting and hit enter.
• Choose Hardware and Sound.
• Select Hardware and Devices and run the troubleshooter.

If issue persists, we suggest you contact the manufacturer to get better assistance.

Do let us know if you need further assistance.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.