Windows 10: Several critical crashes, and BSODs.

Ok where to start. I want to say first that I am literally out of ideas and this is going to be along post in order to be thorough. What do I have?I have a ROG Zephyrus GA401IV 2019 AMD Ryzen-H 4000, up to Ryzen 9 4900HS 35W 8C, 16TNvidia RTX 2060 6GB32 GB DDR4 3200 MHz 16 GB soldered, 1x DIMMNext step: What happened?I was trying to use VM software to practice hosting a server. After installing several VM ISOs and installing them such as Kali Linux, Unbuntu, and Metasploitable. While doing this I was partitioning my 1TB memory storage space and I'd mess up and not assign enough storage spa

:)

 

BSOD Critical Structure Corruption




And there were no yellow or exclamation points in Device Manager....just a long list of items repeated which I don't understand why.













I did zip the last full Memory Dump and uploaded it to Google Drive. Link was in previous post. Did it not work? Although I can reboot into normal state to really use computer without BSOD Crit Struc Corrup I need to stay in safe mode.

 

BSOD critical process died and apps crashing


BSOD Critical Process died and apps crashing - Windows 10 Forums

 

BSOD Critical Process Died




This is my config, what should i do?

- - - Updated - - -

I tried also this:
Step 1. From the initial Windows screen, accept the default settings for the language to install, the time and currency format as well as the keyboard or input method. Next, click the Repair your computer link instead of Install now.

choose Repair your computer
Step 2. Select Troubleshoot and then Advanced Options.

Step 3. Select Command Prompt.

Step 4. Type diskpart and press Enter key.

Step 5. Type list disk and press Enter. Now pay attention to the disk number and identify which one is the boot disk. Usually, it is Disk 0; if not, find the disk number in your own case and remember to type the correct one in the following relevant steps.

Step 6. Type select disk 0 and press Enter.

Step 7. Type list volume and press Enter. Now pay attention to the volume number of the EFI partition.

Step 8. Type select volume N and press Enter. Also, type the one in your own case instead of N.

Step 9. Type assign letter=N: and press Enter. N: can be replaced by any drive letter that is not taken by any partition. Remember which drive letter you assign here for it is rather useful in the rest steps.

Step 10. Type exit and press Enter to leave diskpart.

Step 11. Now type N: (the drive lettered you just assigned) and hit Enter.

Step 12. Type format N: /FS:FAT32 and hit Enter.

Step 13. Type bcdboot C:\windows /s N: /f UEFI and hit Enter.

Now repeat the process of running the bootrec /fixboot command, bootrec access is denied Windows 10 should be solved now. But if fixboot access is denied occurs on an MBR disk, continue with Fix #2.

All steps until 13. was executed successfully, but still became on
bcdboot /fixboot
Error: Access is denied. And I have a GPT and no MBR Partition

bootrec /rebuildbcd
was successfully, founded Win installation: 0 (ZERO)
complete

bootrec /scanos found also ZERO installations