Windows 10: SFC stops at 1%, DISM error 1392, dll error

Hello. After manually installing Threshold 2 AVG PC TuneUp reported errors on my C: disk, so I performed a chkdsk. The system rebooted, naturally, and chkdsk took a very long time, always stuck at the same percentage. CristalDiskInfo reports no error at all times. After the completion of chkdsk, after 9 hours or more, I got an error of mscorwks.dll (0xc0000020).

I assume that either the filesystem or the physical disk are bad. So I try running a SFC, but it stops at 1% saying that it cannot perform the action. I try with DISM and it also stops near the beginning reporting error 1392.

Any ideas on how can I proceed? I don't want to wipe my system *Sad

EDIT: I just tried DISM toolkit from this forum, with the image mounting option, and also error 1392, file can't be read.

Here's the log:
dism.log

:)

 

unable to windows update

1) i am getting windows update error "couldn't complete the windows update undoing changes" update stops at 92%

2) i getting DISM Error 1392 "File or directory is corrupted or unreadable" during /scanhealth and restorehealth

3) sfc /scan stops at 17 % "Resource protection couldn't perform " even in safe mode

 

Dism Error 1392 + SFC Fail at 29%

Lately I've been having some errors with Windows.

Every time I reboot my computer I get a message stating "Getting your Computer Ready" which persists for about 45+ Minutes before the computer reboots.

• I've run check disk and have fixed disk errors.
• I've tried running SFC/Scannow and it errors out at 29% always with the below error.

C:\WINDOWS\system32>sfc/scannow

Beginning system scan. This process will take some time.
Beginning verification phase of system scan.

Verification 29% complete.
Windows Resource Protection could not perform the requested operation.

• The log of SFC/Verifyonly can be found >
  here <

• I've also tried running Dism /online /cleanup-image /restorehealth with the below results

Deployment Image Servicing and Management tool

Version: 10.0.10586.0
Image Version: 10.0.10586.0
[==========================100.0%==========================]
Error: 1392
The file or directory is corrupted and unreadable.

• Log attached >
  Here <

Any help or guidance that can be provided would be greatly appreciated.

 

Someone else is having trouble with AVG PC Tune up.
Try and disable it and see if you get that same error come up
They tried to get rid off it but every time they did it came back

 

You're talking about uninstall TuneUp and run SFC again? I've never have a problem with TuneUp and SFC at the same time, I'm sorry but to me it doen't make any sense as I don't see how that can interfere, but I will try nevertheless.

Thanks for the suggestion mate *Smile

 

Yes only a suggestion but may help in your case, also they may not of updated to latest version yet and that is why you could be having trouble.
Either Bing or Google PC Tune up and see what others have to say about it.
I myself run Auslogics Boostspeed 8 and that has just been updated to latest version since TH2 was downloaded and gives me no trouble at all it is not free but in my mind it is well worth the money.
Have it on all my systems as well as driver updater made by same firm

 

What DISM commands have you used outside of this toolkit?

Please have a look at Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums

You're not actually installing drivers from that program are you?

 

Yes I do and since I have I have not had any driver issues at all, before that I was always having driver trouble and some one from Microsoft Community forum and Bleeping Computers recommend it.
Also certificated by Microsoft

 

I haven't done anything weird with TuneUp, I've been using it before it was AVG. I only use it to clean registry and things like that.

 

Have you got the latest version of PC Tune UP
Because if not up to date that may be causing your problem as well.

You are I take trying to run SFC etc from command Prompt (Admin) as that is what you are suppose to use

 

Yes of course, SFC and DISM directly from CMD.

 

Ok just checking as we have had some on another forum try without doing that.

So disable or uninstall PC Tune up to see if you can now run both those commands.
If you cant then try and run trouble shooter as that sometimes can find and repair the problem

 

Of course. If they are not run in elevated command prompt, sfc will not freeze at 1% and dism will not give you error 1392, because none of them will even start to run without administrator permission.


I know you have done the manual install of Windows 10, you might have to bit the bullet and reinstall.
Use the MCT link below and do an in-place upgrade ( also known as repair install).
https://www.microsoft.com/en-us/soft...load/windows10

Run the Tool after downloaded, select Create installation media for another PC.
That will begin downloading the iso file.
When done, right click at the iso file > click Mount > click Setup.exe.
Installation will begin. You can choose to keep your settings, files and apps.
No product key is required.
Activation is automatic.

P.S. I will not go into "discussion" on using the TuneUp utility.
Just a passing statement...... I'd stay away from any programs of that kind.

 

Which trouble shooter?

 

I'm running a physical disk test right now. I've taken the corrupted dlls from other PC and I've replaced them. Now they're working. I've uninstalled TuneUp but SFC is still not working. I'll reboot later.

And BTW, I think it is a HDD related problem. The Windows upgrade got stuck at one point and it took a lot of hours to complete. The same thing that happens when I run chkdsk. Stuck in one point for several hours. But no bad sector according to all my software...