Windows 10: Should I try to match my Ethernet cable to the Adapter I have installed?

This may be a common question, but I cannot find any previous post about it. My PC's Ethernet adapter is an Intel® Ethernet Connection I219-V, which supports a 1GbE data transmission rate. Reading about Ethernet cables I am seeing many recommendations to purchase newer cat7 and cat8 cables, even though they may be overkill, they are an investment in "future-proofing" my LAN. The problem is, I have also read that Windows 10 is not entirely compatible with 10GbE and there are many reports for instance in the Amazon product reviews and elsewhere from people buying these cables and getting slowe

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Computer not recognizing Ethernet cable

Hi Vijay, I appreciate your help.

I will try each step even if I've already done it, just to make sure, and post my results.

A. When I troubleshoot internet connections, it tells me “Plug an ethernet cable into this computer” and says my cable might be broken or disconnected. However of course i have tried a different working cable with no luck.

when I troubleshoot network adapter, it says “plug an Ethernet cable into the network adapter ‘Ethernet’” which of course has already been done so it is not recognizing it.

B. I tried every suggestion/step listed (except for the wifi troubleshooting since my computer doesn't have wifi) and none of them worked.

C. When I run the windows update troubleshooter, it tells me “download and install pending updates” (Maybe it is not up to date because I tried reinstalling windows 10 to see if that would fix the internet, but it did not. I updated it like last week or
something like that) but of course I can't download the updates without internet. If I click “apply this fix” it tells me to plug in an Ethernet cable. But i believe windows 10 was up to date before this issue even began because I updated it just a week ago.

D. I do not understand this step. The guide is confusing to me. It also appears that I have to download tools in order to do this repair. I cannot download anything because my computer cannot connect to the internet. I don't have a USB flashdrive. I did
try reinstalling Windows 10 though and it did not help.

 

Constantly disconnecting with ethernet cable

Hello,

Thank you for keeping us posted on the status of the issue.

I suggest you to check if rolling back the Ethernet driver helps to resolve the issue. Follow the below steps.

• First of all, Press Windows logo + R from keyboard. It will open
  RUN.
• Now type devmgmt.msc and press Enter to open Device Manager.
• You will see all the device list of your PC. Expand Network Adapters

Rollback driver

Double click on your Ethernet driver in Device Manager. Then Click on
Driver tab and select Rollback.

Important: If your drive is performing well and there is no error, Rollback driver button will be grayed out as an option.

If it still does not help, I suggest you to reinstall the drivers for the Ethernet driver and check if it helps to resolve the issue.

Note: Once you uninstall the drivers the Ethernet adapter device will be disabled and you won’t be able to connect to internet. So it is advisable to keep all the installer files as a back up in your hard drive.

Write to us with the results for further assistance.

Thank You.