Windows 10: Sleep is not working Properly

Hello,I am having a problem with my sleep button when ever I turn it to sleep it works fine but when I wake it up from sleep it shows me a blank screen and then restarts again and then start the pc as I turned the whole PC off. I tried a lot of things but noting seems to work. I have also noticed that when I disable CSM it gets enabled and the Safeboot is set to custom. Tried resetting the whole Pc fully Cleaned.Error I found on Event viewer is-The system has rebooted without cleanly shutting down first. This error could be cause

:)

 

System 'soft crash' + applications not working properly after sleep

Sean,

Personally, I'd go to the display card maker's support site to download & re-install the latest display driver before bothering with any further diagnostic steps.
- Display driver corruption is a common cause of sleep/hibernation-related problems [and my suggestion used to be in the initial steps recommended by MS in Windows 7 built-in Help].
- And I mean re-install not just check for updates.
- I suspect that the reason this fix can work is that re-installing the driver rewrites cross-references to driver components & related system components.



Best of luck,
Denis

 

Windows not working properly

Thank you for the information.

We suggest that you try to run Hardware and Device troubleshooter using the steps below:

• Write Troubleshooting in the search box and hit enter.
• Select the Hardware and Device options from the list.
• Click Run the troubleshooter.

We also suggest that you update the keyboard driver and check if it work.

Hope it helps. Keep us posted.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it