Windows 10: So basically my monitor is turning on but its not displaying anything even not being...

Please help and thank you

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

Monitor wont display after monitor turned off

I recently build a new system and used an old monitor, no problems. I bought a new monitor and If I turn off my monitor and turn it back on it gives me no display and says no signal detected. I am forced to restart computer several times to get image back to the monitor. Once display is on there are no problems as long as I don't turn off the monitor again. I have read there is a bios update but when I go to Gigabyte page they are listed as F3, F13, F42 and F51. How can I determine which F version my card is?

Also I returned monitor and card with the same products thinking it was hardware issue but the problem remains. I have even reinstalled the OS.

MSI Z97 Gaming 7
4790k
Gigabyte gtx 970 G1 gaming
Gskill Ripjaws 2133 16gb
Monitor Benq 2765 2560x1440p IPS

 

Display Turn Off in Power Options Causing USB Disconnection

Hello everyone, I'm encountering a peculiar issue related to the Power Options settings on my Windows machine (Version 22H2). Whenever Windows automatically turns off my display, it seems to inadvertently cause the devices connected to my USB hub to disconnect. Here's a more detailed description of the problem:

1. Display Turn Off Issue: After Windows turns off the display, my USB-connected devices disconnect.
2. Wake-Up Login Requirement: When I wake up the monitor with a mouse movement, I'm prompted to log back into Windows, as if the system had entered seep mode or logged off.

Steps I've Taken So Far:

• Set Power Options to never enter sleep mode.
• Disabled hibernation and USB selective suspend.
• Restored default power settings using "powercfg -restoredefaultschemes".
• Imported power options from "Default_Power_Plans.zip" found on this forum.
• Analyzed settings with PowerSettingExplorer, but nothing unusual was noted.
• Checked the event log and Sleep Study report ("pwrcfg -systemsleepdiagnostics") for any signs of the machine being put to sleep, but found none.

Interestingly, this problem does not occur when I manually turn off the monitor. It only happens when Windows does it automatically. Also, this issue is not isolated to one machine; it's happening on several, which leads me to believe it's not a hardware issue. I'm looking for any suggestions on how to further diagnose and resolve this issue. Your input would be greatly appreciated!