Windows 10: So few days ago I started getting errors, drives connected to Marvel sata controller not...

Everything works fine connected to AMD SATA controller on the same pc. Drive also shows up in bios every time.Device PCI\VEN_1B4B&DEV_9172&SUBSYS_B0001458&REV_12\4&edb6346&0&00AA had a problem starting. Driver Name: oem2.inf Class Guid: {4d36e97b-e325-11ce-bfc1-08002be10318} Service: mvs91xx Lower Filters: Upper Filters: Problem: 0x15 Problem Status: 0x0 Device name DESKTOP-SVOCV7A Processor AMD FXtm-9370 Eight-Core Processor 4.40 GHz Installed RAM 32.0 GB Device ID 30C0F175-0788-43B7-96A7-260FCBD94694 Product ID 00330-80000-00000-AA286 System type 64-

:)

 

Marvell 92XX SATA Controller 6GB Driver for Windows 10 1.2.0.1039-WHQL


I had some performance issues with the Marvell SATA controller on my Gigabyte motherboard in Windows 10. I just disabled the Marvell SATA controller in the BIOS and connected all drives to the Intel SATA ports instead which are stable. Problem solved!

 

Desperate Plz Help! Problem with Marvel sata 3 controller and raid 3 TB wd drives

Thanks guys for ur suggestions! Im thinking to leave the drives on the marvel controller as they are and just format and use them as individual drives and with the use of synchronisation software to have my kind of raid 1. Is this the best solution or shall i just connect them to the intel controller instead? And what synchronisation software would u suggest? Is Allway Sync the best?

Thanks in advance

 

Marvell 92XX SATA Controller 6GB Driver for Windows 10 1.2.0.1039-WHQL

tried checking properties no policy tab, uninstalling the system devices Marvell 91xx driver the system won't boot, blue screen then after entering safe mode and reboot drives get recognized as IDE no trim and performance loss, I'm only seeing the Marvell driver for system devices in control panel I added it's bus number to the TreatAsInternalPort. reg. value but the safely remove USB icon is still present in tool bar with no devices listed under it