Windows 10: So I installed the sound blaster 16 drivers for windows 3.1 but I’ve been getting no sound

So I installed the sound blaster 16 drivers for windows 3.1 but I’ve been getting no sound And these pop ups “Sound blaster 16A configuration or hardware problem has occurred. Run the drivers applet in the control panelto re-configure the wave and midi driver”Pressing the setup button in the driver options doesn’t have any settings“Sound blaster 16 ERRORConfiguration problem.The wave and midi driver is not enabled”I don’t know how to enable it I can’t find the option“SB16FM.DRVFM hardware is not responding.Use the drivers applet to re-configure” As you can see I am in a bad situation trying to

:)

 

Sound blaster x-fi mb3

Hi Duncan,

Welcome to Microsoft Community.

I understand your concern. Let me help you to fix the issue.

Let’s try simple troubleshooting steps and check if this helps in resolving the issue. Follow the below methods.

Method 1.

I suggest you to run the Hardware and devices troubleshooter to diagnose the exact issue.

• 
  Press Windows + X keys on the keyboard and select Control Panel.
  
• 
  Type Troubleshooting in the search bar on the Control Panel.
  
• 
  Click on Hardware and sound under Troubleshoot computer problems.
  
• 
  Click on Hardware and devices under Devices.
  
• 
  Click on Advanced on the Hardware and devices dialog box and click on Run as administrator (Enter the credentials if required).
  
• Click on Next and follow onscreen instruction complete the Hardware and devices troubleshooter.
  

If the issue still persist, try the below method.

Method 2.

Step 1.

I suggest you to go to the device manager and uninstall/reinstall the sound adapter driver and check.

• 
  Press Windows key + X and select
  Device manager.
  
• 
  Now click on Sound, video and game controllers
  to expand, right click on the device and click on uninstall.
  
• 
  Once you are done installing the driver, restart the computer. It will automatically install the sound adapter driver.
  

If the issue still persist, try the below steps.

Step 2.

I suggest you to update the audio driver and check.

• 
  Press Windows key + X and select
  Device manager.
  
• Now click on Sound, video and game controllers and right click on it and
  update the software.

If the above methods did not help to fix the issue, try the below method.

Method 3.

I recommend you to go to the computer manufacturer website and download the latest updated sound adapter driver for Windows 10 and install the same. Visit the below link:

http://software.store.creative.com/p/software/sound-blaster-x-fi-mb3


Hope it helps. Keep posting us with the status we will be glad to help you.

 

Lost sound after latest Windows 10 update (Sound Blaster Z)

Excellent walk-through! I basically followed these steps, albeit using a slightly different method, and yet I still couldn't get sound out of my headphones. The one step I changed in my process, which seemed to make a difference, was ONLY installing the control panel and drivers as @kunyiosh stated in his steps. Now I finally have sound from my headphones. Just to clarify, my sound was working just fine prior to the Preview Build 17063 update. Thanks for the tips!

 

Lost sound after latest Windows 10 update (Sound Blaster Z)

Hi All

This is the first post I have made and hope it helps because I have had this problems for over 2 years. My Sound Blaster Z would produce no sound after Windows 10 creators and anniversary updates. I Deferred updates for 2 years but when 1709 was pushed it circumvented my deferment so I decided to give it a try before the customary Rollback of the OS to 16**.

So my problem consisted of Sound Blaster Z either producing no sound with no sound signal visible in volume mixer which was often accompanied by slow video streaming or none at all. I would then reinstall drivers and would get the green bars in volume mixer but still no sound and very slow video streaming, again with no sound.

Now when 1709 completed I had sound for the first time AFTER a shutdown and cold boot. This was without any Sound blaster software installed. The problem reoccurred when I installed the Sound Blaster Z drivers again and all the above problems reoccurred. So... now to the fix.

First turn off windows fast boot which you can read how to do HERE. Now go into your Bios and deactivate onboard sound so that the only option for you will be the sound card. Find out how to do this by reading your Mother Board Manual or Google your boards name for videos or guides on how to do it. Onboard audio can cause conflicts with sound cards. In my case it would cause windows start up sounds to cut out or be choppy. I only discovered this AFTER disabling onboard sound in my bios. *Confused Save and exit after making the change to your bios and allow system to reboot.



I then uninstalled all drivers and removed all creative folders and registry keys I could find. You can do this before the bios changes, it doesn't really matter but this step MUST be done before trying to install sound blaster Z drivers.
1) C:\Program Files (x86)\Creative
2)Have "Show Hidden folders" on to find this file easily ** C:\ProgramData\Creative
3)C:\Users\YOUR COMPUTER NAME\AppData\Local\Creative
4)C:\Users\Public\Creative

Open RUN and type "regedit" and delete the Creative Tech keys.

1) Computer\HKEY_CURRENT_USER\Software\Creative Tech
2) Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Creative Tech

Then restart. I also use CCleaner but you don't need to.

Now let windows install its own driver for the Sound card. You should have sound but no control over sound blaster Z setting such as EQ as the control panel is NOT installed by windows 10 automatically. Once this process is finished install the Drivers from HERE. Some people at the time of this post were saying that SBZ_CD_L13_1_01_08 was more stable but I am using SBZ_CD_L13_1_01_10. Follow the installation instructions and go to custom and install the Controller driver and Sound drivers ONLY. They are the top 2 options. Clicking the other options produces a drop down menu and an option to not install that specific item which is shown as a red X.

Restart system as instructed at the end of the installation process. Sound should now function properly. IF you have a problem (I have had none following the above steps) go to Device Manager - Sound, video and game controllers - Sound Blaster Audio Controller and ROLLBACK. The rollback option will only be there if you let windows install the drivers as instructed earlier. Doing this allows the control panel to be installed but gives the option to roll back the driver if you have a recurrence of the problem.

Sorry for the long explanation but I hope it helps someone. As I said before it took me 2 years to find a fix.

Windows 10 Windows 10 creator update creators no audio no sound not working can't hear sound blaster z creative June July 2017 Creative Sound Blaster Z 1704 1709 Creators update Fall Update.