Windows 10: some websites fail in win 11, no issue with win 10...........workaround?

some websites fail in win 11, no issue with win 10...........workaround?

:)

 

Upgrade Win 10 to Win 11 failed

Have PC with 4 partition managed by EasyBCD,

1. Boot partition (500M, active partition)

2. Win 7 (140G)

3. Win 10 (120G, my production machine, boot by default)

4. Win 7 (140G, play partition)

Recently try to upgrade partition 3 to Win 11. Upgrade steps seem to work smoothly until it reach 100%.

Then I get message "PC will restart in few moments"

Then I get "Win11 installation has failed"

I check the srttraic.txt file and found the folloing:

"Root cause found: No OS files found on disk

Repair action: Partition table repair

Result: Failed error code 0X20"

However, I seem to have no problem to boot my Win10 without error even the installation has failed.

Some trouble shooting from my side.

1. I am able to boot Win 7 or Win 7 (play partition) if I use a disk manager to set these partition to active.

2. I am not able to do so if I set Win 10 partition as active, I have to set the 500M boot partition and select Win 10 from boot menu.

3. I boot Win 10 installation disk from USB and try to repair my Win10 partition, but repair failed.

4. I backup the whole disk, set Win 7 partition as active, I can upgrade this partition from Win 7 to Win 10 and to Win 11.

5. Si I believe my PC hardware is no problem to support Win 11.

How can I recover my Win 10 partition without loosing my application so It can be boot without the boot partition?

 

Upgrade Win 10 to Win 11 failed

This is not true.

I backup my disk and set my win 7 partition to active. I am able to boot to win 7, and subsequently upgrade the win 7 partition to win 10 follow by a upgrade to win 11.

I then set my 500M boot partition to active. I am able to select boot from win11, win10 and win7 play partition.

All without change to BIOS to secure boot or UEFI. But my applications is mainly on win10 partition, which fails to upgrade to win11. I would still like to know why it fails only on my win10 partition and not win7 partition.

Will try to issue the BCDedit command and post here at next chance.

 

Win 10 1511 10586

Been on Win 10 for about 6 weeks upgraded from Win 7. Win Update listed Above update avail. Loaded it but it failed at restart. Could not then restart PC. Used repair disk to boot and system restore back to orig Win 10 ver. Got error 0x80000fff problem
during restore which appears to be a vista / win 7 restore issue. Fix will not run on Win 10. Any suggestions