Windows 10: Some Windows Update might be corrupted?

Hi I had this problem on my lenovo Ideapad PC windows 10 where some of my settings are not working or letting me open. First notice when I can’t hear anything through my headsets and I saw there are no device detected even the built in speaker can’t be detected and I tried troubleshooting it and it can’t detect anything. After that I tried opening Control Panel and I can’t open it and a pop up will show up that says like “The parameter is incorrect” or sometime an other similar pop up will show up. I even tried to open driver mananer its the same pop up, but i can forcefully open it through “Run”.

So i search through various website and tried very possible solutions but nothing works, like I can’t open windows update its stuck at a blank panel just the menu at the right side and the loading animatios at the top of the panel, after checking that a can’t open the Windows update panel i tried reseting it, and it loads at one percent for amount of time and undo the changes automatically and not reset, I also tried every sfc scan in normal windows and also in safe mode it just say “windows resource protection could not start the repair service” so I tried the DISM like the other solutions i found but still nothing, and the last thing i did is to chkdsk /r, and waited over night as well and tried sfc scan, it still give the massage windows resource protection... I’ve run out of every options so ill try and ask here by opening a forum.

i can still run the installed app and connect to the internet just this problem.


Hope you can help and give possible solution and thank you for your time.

:)

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.

 

Windows updates...

Oh. Your "Registry" must have gotten screwed up FLY3R. If for some reason you couldn't download your updates I suppose you could go to the update site, and run throught the steps 'till it fails activation. Then you could go up to "Tools > Manage Add ons > then disable "Windows Genuine Advatage Validation Tool." Of course you should only use this method if you are having problems updating your legitamate copy of Windows XP. Perhaps do to a corrupted piece of software? *Smile

 

Windows 10 wont update

Have you tried the second step?

(Searching for the error message e.g.

windows update database corrupt

is also a useful approach- e.g. finds
Win 10 Update Database Corruption Solved - Windows 10 Forums
- where the next step is the one I suggested above).