Windows 10: Someone please help I'm at a loss

Okay so I'm not sure what the issue if it's related to the update or not, but I currently run windows 11 and for a couple of weeks now I have been have the same issue and I can not figure out what it is or how to fix it. So when I boot my computer it loads just fine but then when I get to the log in screen and log in my screen goes back and nothing happens I have to wait and and eventually it will come back on...or I can go to a guest account and get in sometimes and then switch user to get to my account.To add insult to injury I can't use troubleshooter I can't reset or recover my computer,

:)

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...

 

loss of control

Hi,

Sorry for the delay in response:

I would suggest you to run hardware and drivers troubleshooter to help you with the problem.



Try the following steps to run the troubleshooter:

• 
  Click "Search" and type "Troubleshooting" without quotes and hit enter.
  
• 
  Click “Hardware and Sound”
  
• 
  Select “Hardware and Devices”
  
• 
  Click next to run the troubleshooter.
  
  Hope this helps.