Windows 10: SSD + bad HDD?

My hdd currently has 16 bad sectors and disk usage is always throttled to 100%. would performance increase if i install os in a ssd and use hdd alongside with it? will my hdd cause any performance issue?

submitted by /u/Anindo9416
[link] [comments]

:)

 

External SSD recognized as HDD in Windows 10

Hi,



Thank you for writing to Microsoft Community Forums.



I understand your query related to External SSD showing as HDD when connected to the PC using USB 3.0 port. For further clarity on the issue, please respond to the questions below.

1. Have you tried connecting the SSD to any other PC?
   
2. Are you using any converter to connect the SSD through USB 3.0 port?
   
3. Are you using a RAID configuration?
   

I have researched on your query and found that the SSD that you are using is an internal SSD drive, in this case I would suggest you to try updating the Intel Rapid Storage drivers from the

intel website and see if that helps.



In addition, this issue can occur if the SSD is connected to a SATA controller that is identified as RAID (SCSI). I would suggest you to try connecting the SSD to a SATA port that uses AHCI controller such as Intel SATA controller/chipset.



Please get back to us with the detailed information to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

HDD Bad Sector

Hi Nataniel!

I am not sure what your question is exactly, but one thing I'd recommend for sure will be to look for a replacement drive since there is already a bad sector on your current one.

Basically there are two kinds of bad sectors - hardware and software:

• Hardware ones are caused by physical damage or becoming magnetically fixed, and they are unrepairable. In short, once they appear it's only a matter of time (no way to say how long) until the HDD fails.
• Software bad sectors on the other hand occur when something called an Error Correction Code (ECC) doesn't match the contents of the hard drive. These can be repaired by overwriting the data on the drive with zeroes (a.k.a. low level formatting) and sometimes
  by running a **chkdsk [write the letter of the drive:] /r** in the CMD.

As for getting the information from the drive if one of the partitions fail, most likely you won't be able to, which is why I'd suggest to make a regular backup of your most important data.

Hope this helps and feel free to ask any questions you may have.

 

TOTAL LIST OF SOFTWARE INSTALLATION ON HDD WITH MULTIPLY BAD UNRECOVERABLE SEGMENTS.

Is there a way to export from a hdd with multiply bad segments, that will not boot the list of previously installed software. The new hdd and software has been installed, however having a list of software from the Bad HDD would make the recovery complete
for the client. especially when the client has not recollection of all previous software. Bad HDD can be used as external drive, not as primary bootable.