Windows 10: ssd sata wont boot with windows

im using windows 10 yesterday i acquired a new ssd m2 i installed it but after boot the windows wont boot, after checking bios i can see all my storage disks two m2 ssd, one hdd but i cant see the sata ssd with windows on and my pc wont boot, it says bootable device not foundpc worked fine until i installed the new ssd m2motherboard is tuf b550 plus

:)

 

New SSD wont boot

Hi John

Boot into BIOS, is SATA Mode set to AHCI to enable booting from an SSD drive?

Is the SSD drive set a top of the Boot Priority list?

Did you try connecting that SSD to the SATA Port normally used by your old HDD?

 

Booted desktop SATA SSD with laptop M.2 SSD now the desktop SSD won't work (both have windows 10 installed)

A little backstory, both SSD's have windows 10 on them with different license of course.

I wanted to read the laptop SSD as a regular drive so I can export files from, into my new desktop. I placed the laptop ssd into the desktop while it was running, but there was nothing to be found in disk management, so i rebooted.

After rebooting, i unexpectedly found that it booted into my laptop's windows with it's SSD as C: , instead of my desktop's.

I then copied the files i needed from my laptop's ssd into a third formatted ssd and proceeded to attempt to reboot into my desktop's windows with the original SATA ssd.

Now my original windows on the SATA ssd wont boot and is stuck on automatic repair loop, while booting from my laptop's m.2 windows and SSD works perfectly fine.

I need to boot from my original SATA ssd because I wont be needing my m.2 laptop SSD.

I have an ASROCK B450M/ac motherboard

(You might suspect that windows dual boot have replaced the boot files of the first drive, and now it depends on the second drive to boot, but even with the second drive in, the windows on the first drive still wont boot. I can still access all the data
in my SATA SSD through my m.2 ssd's windows).

 

SSD as Boot and Raid as secondary

I've just bought a vertex 2 and have installed windows on it, but am having difficulties setting up a RAID0 with my 2 HDD's that i want to use as my backup/seconday drives. If i set my Sata config to raid it wont let me boot with my SSD. Any suggestions?