Windows 10: Steps of system failure - GPU Artifacts then Blank Screen then Restart - HELP Please

So I've been experiencing issues lately with my system:CPU: Intel® Core™ i7-11700KF ProcessorMOBO: MSI Z590-A PROSTORAGE: 1TB WD Black 3D Series SN750 M.2 PCIe NVMe SSDPSU: Corsair RM850x 2021 brand new, replaced RaidMax Cobra 800w GOLD, I thought my system wasn't getting enough power, I was wrongRAM: Corsair Vengeance RGB PRO 32GB 4x8GB DDR4 3200MHz C16 brand new, replaced TEAMGROUP T-Force Delta RGB 2x8 GB / I thought it was bad RAM, g

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Windows 10 infinite restart black screen


The tutorials provided are just a list of troubleshooting steps. Use only the steps which apply to you.

Since none of the troubleshooting steps here worked, I'd suggest you do a Clean install.

John

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds