Windows 10: Storage spaces ,missing option for :change settings" .Windows ver 2004

Hi ! This is my first post ever.I hope you guys are ok even COVID-19 trouble.
I have problem with my storage spaces which is not showing option "change settings".Is it anything I my try to get all available options displayed?
Thanks in advance for the answer.Best regards -richard

:)

 

"Change" option not available to manage storage spaces

Hello KAC_NYC.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

1. Press Windows key + R, then type in winver.
2. Click OK.

• What type of storage pool are you using? (Simple, Two-way mirror, three-way mirror, and Parity)?
• Where does the incorrect storage size occurs? Is it through Disk Management or File Explorer?
• Kindly send me a screenshot of the missing "Change" link.

Meanwhile, you may try running the command in this article
to optimize storage pool.

Currently, this is the only thread
I've came across that is very similar to your concern.

Looking forward to your response.

Regards.

 

"Change" option not available to manage storage spaces

I added an additional 1TiB NVMe module to HP Quad Drive card that used to have three 1TiB modules

to make a total of 4. Originally the three were set up in storage spaces as a simple drive with about 2.77TiB

total capacity. After using the "add drive" option to add the extra module, I now have 3.72TiB available in the

"Storage Pool", but the available space on the "D" drive has not changed, still showing 2.77TiB. When researching

this issue, in every case there is a "change" entry on the right menu near the drive space description. Mine is missing.

I can't extend the partition in disk manager, and each individual drive does show up in the "drives" section properly.

So- Pool size is correct, Storage Size is not correct, all drives accounted for.

Any ideas aside from wiping and recreating the storage space?

Thx-

KAC

 

Windows 10 Home will not boot or restart with USB Storage Spaces pool drives attached

Hi George,



Thank you for posting your query in Microsoft Community.

I understand your concern and will assist you to resolve this issue.

• 
  Did you make any changes in BIOS?
  
• 
  Are you getting any error message?
  

I suggest you to update Storage controller drivers and check if it helps.

Steps 1:

• 
  Press Windows key + X.
  
• 
  Select Device manager.
  
• 
  Expand Storage controller.
  
• 
  Right click on the driver and Update the drivers.
  

Steps 2: Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue
is with device. Refer these steps:

• 
  Press Windows key +X, select Control panel.
  
• 
  Change the view by option on the top right to Large icons.
  
• 
  Click on troubleshooting and click on the view all option on the left panel.
  
• 
  Run the Hardware and devices troubleshooter.
  

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help