Windows 10: store data structure corruption BSOD

Hello!Every time I turn off my computer and turn on again after 2-3 hours a BSOD appears.Some times is "store data structure corruption BSOD" other "memory management".It only stops appearing when I suspend my computer instead of turning it off. Any solution to that problem?Regards,

:)

 

Store data structure corruption by ntoskrnl.exe

I have an issue where I would frequently get BSOD with error: STORE_DATA_STRUCTURE_CORRUPTION when using google meet. It may have happened other times but rarley. It is only a major problem when using google meet, happens about every 15mins.

I have followed the suggested steps here: BSOD: Store Data Structure Corruption caused by ntkrnlmp.exe and ntoskrnl.exe

but in vain.

Any suggestions?

System:

Huawei matebook X Pro 2018

 

BSOD with store data structure corruption

Hi there, recently ive upgraded to w10 1903, working fine till today where the bsod appeared with store data structure corruption(ntoskrnl.exe+25daee).

anyone had any idea with this issue?

below is the dmp file extracted

061119-15109-01.dmp

thank you.

 

BSOD: Store data structure corruption

The last dump, dated 8/21 1:17PM is STORE_DATA_STRUCTURE_CORRUPTION (1c7)
This is what Microsoft has to say about that error:

Code:

Start by setting all tweaks to nominal, clocks and voltages, see if that removes the problem. If it does then you can start reapplying your tweaks a little at a time until you find what is causing the error. If you are not doing any tweaking then test your ram as follows:

===================================================
Up through DDR3, follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums
DDR4, follow this tutorial: MemTest86 v8.1 Free Memory Testing Tool Review

Both of these are diagnostic tools designed to test Random Access Memory (RAM) for faults. They will verify that:

• RAM will accept and keep random patterns of data sent to it
• There are no errors when different parts of memory try to interact
• There are no conflicts between memory addresses

They run from bootable media to isolate the RAM from the system, no other components are taken into account during the test.



Warning MemTest86+ and Memtest86 need to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM. The new version of Memtest86 only allows 4 passes for the free version so run it twice, back to back.
If you are asked to run MemTest86+ or Memtest86 by a Ten Forums member make sure you run the full 8 (or 4+4) passes for conclusive results. If you run less than 8 passes you will be asked to run it again.



Note Both of these diagnostics has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.
Running 8 passes of MemTest86+ or 4+4 passes of Memtest86 is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run it overnight, starting just before you go to bed and leave it overnight.

Take a picture when done and post in the forum please.