Windows 10: struggling setting the Ricoh IM C4500 on Window 11, printer is install, but always print 0...

Helo struggling setting the Ricoh IM C4500 on Window 11, printer is install, but always print 0 queue struggling setting the Ricoh IM C4500 on Window 11, printer is install, but always print 0 queue , the only thing I can is to reinstall the driversRicoch document said un-install the drive, release the TCP/IP port and reinstall it, Unfortunately I still not struggling setting the Ricoh IM C4500 on Window 11, printer is install, but always print 0 queue printing thing

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

connecting printer Ricoh Aficio FX200 to Win10

I recently purchased a Toshiba laptop running Windows10 64 and I cannot get my old Ricoh Aficio FX200 connect and print even after downloading the presumably (PCL6 generic driver) right driver from Ricoh web site.

I only see my printer in the :unspecified" devices from the "printers and devices" page but is never detected when I try to install it by adding printer.

Unfortunately my skills are limited and I'd need a step by step type of help on how to proceed assuming there is a solution!

Can someone spend a minute to help?

Thank you in advance for your time.

Sandro

 

Ricoh SP 210 SU All in One Laser Printer

Hi Mark,

Thank for your response. I visited your referred site earlier also and by now too, but could not find out the step #3,4,5. I tried it in my Windows 7 Computer but could not find it out.

In my Windows 7 there is no issue for language as the driver CD was meant for Windows XP and 7 only.

• 
  Open the printer properties dialog box.
  
• 
  Click [Printing Preferences].
  
• 
  Click the [Printer Configuration] tab.
  
• 
  Click [Environment Settings...].
  
• 
  In the [Language:] list, select the language you require.
  
• 
  Click [OK].
  
• 
  Click [OK].
  

With Regards