Windows 10: Stuck after press any key to skip c drive repair part 1

I runned some cmd code, then restarted my computer and got the message: repair C drive stage 1, but i pressed any key to skip it and now my screen is black, i can only see the mouse cursor with a loading sign to it and my pc makes lot of noice and it has been doing something for now 14 hours. I dont know if i should let it run further but very frustrating since it dont show when its done or What its doingThanks in advance

:)

 

repairing drive c

The part of process that you are in when updating Windows is the check disk (CHKDSK), the system is checking your drive for errors.

Are you still having the issue and stuck at Scanning and repairing drive process?

As a workaround, you can follow these steps to bypass the CHKDSK process:

• Hold down the power button for 4 seconds.
• The PC will reboot.
• You will get stuck again on the process, repeat step 1.
• You will get a message "press any key to bypass the chkdsk."
• Press any key and it will continue on the update process.

Let us know if you need further assistance.

 

Stuck in startup repair boot loop, C drive is in RAW

Okay. I'll try with disk genius.

- - - Updated - - -

Okay I tried this command with disk genius.





I got this result.





Then I tried this command.





and got this result.





I forgot to mention earlier. 1 hour back, when I checked my C drive it is back to normal. I was able to run chkdsk /f and /r

These analyses were done after that. The issue hasn't got resolved yet and I'm still stuck on the startup repair loop.

- - - Updated - - -

Okay. So I eventually created an image of my C partition using Macrium Reflect PE environment. Everything went fine. For some unknown reason, the image was of approximately 100gb in size whereas my C partition was occupied upto almost 175 GB.

Then I booted using the windows 10 USB and deleted all the partitions of the C drive during the installation menu that asks for the location of windows 10. Then I chose the newly formatted C partition to install windows.
The installation went fine. I got to the desktop wallpaper screens and icons. Then I booted using Macrium and restored using the image file.
After I restarted my laptop. I got this error.







After pressing enter, I got this.






Then I checked in the boot menu of my BIOS. To my surprise, my SSD was not listed in the boot menu. Don’t know why.






Then I booted using Win 10 USB, and ran sfc scannow. I also ran DISM, trying to restore the image from the official windows files present on the usb drive and got these results.





Upon checking the volume information, I got this.








I also tried to fix the bcd using the following commands.
bcdboot c:\Windows /s Z: /f ALL

The letter Z was assigned to the 100mb ESP partition on the D drive
Now this 100mb partition is present on my D drive (SATA).
The bcd fixing went well. I got the message ‘Boot files successfully created’

Unfortunately I didn’t click a photograph of the result.
Now I booted again in windows and I am seeing this result.






After pressing enter, I got this.




Now I am stuck and absolutely clueless about my next step. Please advise.

 

Stuck in Automatic Repair = inadvertently changed C: drive path?

@zbook- what I'm suggesting should resurrect the PC, provided what's left on the "C:" is at all viable - the clean install is just a step to that. Saves a lot of technical bits and time on our part.