Windows 10: Stuck in Bios/repair options

Whenever I try to start my laptop, it loads into bios. The only way I could get out of it is by using a recovery drive but it isn’t the original. I would get sent to auto repair options, but none work except cmd prompt. I’ve tried doing a few commands but all of them lead to failure. I can’t even reinstall windows with a downloaded copy. My laptop is Asus X455L. How did this all happen? Well, my laptop has freezing problems and it just started auto repairing from out of no where. It got stuck so I shut it off completely then all the things above happened.

:)

 

BIOS stuck in a loop.

Hello,

We would like to ask some additional information to better isolate the issue:

• Did you get any error messages?
• Have you tried to boot in Safe mode?

We suggest that you check the solutions provided on the links below:

BIOS-loop

Stuck-in-BIOS-loop

We will wait for your response.

 

Powercolor RX480 BIOS required

Find the unverified bios option.

 

Stuck in Windows 10 Upgrade

My computer seems to be stuck in a Windows 10 failed upgrade loop. I was running fine on a beta version of Windows 10, and then I came downstairs one morning to see it repeatedly booting, attempting to repair, then rebooting. The steps I've taken to diagnose are:

• Attempting to boot off a USB drive (with all drives disabled in BIOS) - this fails at the point of the blue windows screen
  
• Attempting to boot the machine itself and getting into "repair/safe mode" using F7
  
• Looking at the BIOS for obvious failures (e.g. RAM that should be there is missing) - nothing obvious is wrong.
  

I am fairly certain the build version was 9926. For many months, the system would attempt to upgrade, and then say "it failed" for some reason and roll back.

Suggestions for next steps?