Windows 10: Stuck on getting device started…

I have been working with a Toshiba satellite running 8.1. When I started with the machine it was behind on updates and running 4 GB RAM. I attempted to upgrade to windows 10 with media tool. Device gets stuck at getting device ready. It will freeze at 33% , 66% or just getting device ready. I have upgraded RAM to 8 GB reduced back to 4 GB . Changed out to new hard drive still no change.

:)

 

is it possible to hand build a motherboard?

Might I suggest you simply build a computer, making notes and taking pictures step by step. Most people (probably including your teacher) have no idea even where to start building a computer. You'll do fine, and if you get stuck we're here to help ya out! *Toast :toast:

 

HID-compliant mouse. Device Status:This device cannot start. (Code 10)

Have you tried updating the driver for the HID-compliant mouse?

Follow these steps on how to update the driver:

To do this, follow these steps:

• In Device Manager, click the Driver tab in the device's Properties dialog box.
• Click Update Driver to start the Hardware Update Wizard.
• Follow the instructions to update the driver.

If that does not work, we suggest you contact the manufacturer of your laptop directly and ask for updated drivers for Windows 10.

Regards.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.