Windows 10: Stuck on loading screen after system reboot

Hello. I am stuck in the loading screen after rebooting my pc. Everytime i type in my password, it freezes and i have to reboot it again or there is an instance where i can type in my password it keeps me on “Welcome” and the loading dots are not moving at all. Tried everything. Removed the cmos battery, switching the ram to different slots, 4x8 Pulled the trigger on reset hoping it would fix the issue but to no luck the problem still persist.

:)

 

Windows 10 stuck in loading screen with spinning dots

Hi,

Windows 10 is stuck in loading screen. Here are the things that happened before it became like that:

• I noticed that my Dell laptop is lagging so much even after restart so I checked the Task Manager and noticed that the Disk is at 100%.
  
• Found out that Avast premiere is causing the Disk to be at 100% so I End Task it
• Triggered CHKDSK upon startup in order to check if Disk is fine.
• Upon startup Check Disk ran but it is stuck at 12% even after almost 2 hours of waiting. So need to hard reboot. This persisted around 3 times
• Upon reboot Dell Diagnostics automatically kicked in since it detected that the system was not shut down properly. Result is that no problems found.
• After Dell Diagnostics, the system rebooted and now is stuck to the loading screen with the spinning dots.

Solutions that I tried:

• Used Media Installation Tool to do Startup repair. But result is that the Automatic startup repair cannot resolve the issue.
• Performed system restore to earlier date. The restore was successful but I am still stuck at the loading screen with spinning dots upon reboot.
• Startup Settings does not show in the Troubleshoot menu so activated the F8 to trigger safe mode. Upon selection of Safemode with network the system reboots and gets stuck in Dell logo screen.

Please advise. If possible I want to avoid losing my files.

Thanks!

 

System stuck with loading circle in reboot loop on Windows 10

Hi Joey,

Provide us additional information to assist you better with this issue:

• What is the complete error message/ error code as the computer stuck at reboot loop?
• What exactly were you trying to perform prior to this issue?
• What is the make and model of your computer?

Let us try the troubleshooting steps below and check if it helps.

As a workaround I suggest you to unplug all the external devices connected to your computer, hard reboot the device and check with the status of this issue.

If the issue persists, try the troubleshooting steps below as the boot files of current operating system might been corrupted.

I suggest you to download Windows 10 ISO file, create an installation media from other working computer to perform Startup Repair of the computer that you are unable to boot.

Using ISO file to perform Startup Repair will allow the device to boot the system to Windows Recovery Environment and tries to repair the device.

Step 1:
I suggest you to try Startup Repairing the Windows and check if it helps.

Download the Windows 10 ISO and create a Media Creation tool and then perform Startup Repair.

Refer to the following link: Installing Windows 10 using the media creation tool

(Refer to the section "Installing Windows 10 using the media creation tool” in the above article for creating the tool).

Step 2: After creating the tool perform Startup Repair.

I would like to inform that, if your Windows 10 is not able to boot or startup, Startup Repair will come into action and try to diagnose and fix the issue. It will scan system files, registry settings, configuration settings and
more and try to fix the problem on its own, automatically.

Perform the Startup Repair:

• When your computer starts, wait for the manufacturer logo to check the option for boot menu, it will usually be
  F12.
• The boot menu key might differ with each manufacturer. If you are unable to find the boot menu key, you may refer the user manual.
• Restart the computer, when the manufacturer's logo is displayed, keep pressing the
  Boot menu option key to enter the boot menu and change the boot option to
  CD\DVD ROM.
• After you boot your computer using Windows 10 DVD, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.
• Select the correct time and Keyboard type.
• Click Repair your computer in the lower left corner
• Click on Troubleshooting, advanced option and then click
  Startup Repair.

Hope it helps. Kindly update the status of booting the operating system to desktop from rebooting loop. We will be happy to help you further.

Thank you.

 

Stuck in Windows 10 Upgrade

My computer seems to be stuck in a Windows 10 failed upgrade loop. I was running fine on a beta version of Windows 10, and then I came downstairs one morning to see it repeatedly booting, attempting to repair, then rebooting. The steps I've taken to diagnose are:

• Attempting to boot off a USB drive (with all drives disabled in BIOS) - this fails at the point of the blue windows screen
  
• Attempting to boot the machine itself and getting into "repair/safe mode" using F7
  
• Looking at the BIOS for obvious failures (e.g. RAM that should be there is missing) - nothing obvious is wrong.
  

I am fairly certain the build version was 9926. For many months, the system would attempt to upgrade, and then say "it failed" for some reason and roll back.

Suggestions for next steps?