Windows 10: Stuck on Logo, no spinning loading.

Hi, i was going to start up my laptop, but then it just shows up the logo without the spinning circle below it Picture belowI tried restarting it, unplugging the charger cable to try and let the battery drain, then charge it then starting it up, Ctrl + things, and many more. But it's still stuck here. If i let it be, the logo would dissappear, then what follows is a completely black screen, then a blue screenPicture Below,then it shut downs by itself. What should i do, what is the problem and what can i do to prevent it happening again in the future?

:)

 

Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

The BIOS update suggestion posted above by @Jegler helped me, @guhanath. I was on version 1.10 and updated to 1.90. The steps I took after that were just doing the official Windows 10 upgrade procedure.

Then the Windows 10 installation went without a hitch, and I'm no longer on Windows 7. I'm going to consider this solved, thank you @Jelger for the suggestion to update the BIOS!

 

Windows 10 stuck in loading screen with spinning dots

Hi,

Windows 10 is stuck in loading screen. Here are the things that happened before it became like that:

• I noticed that my Dell laptop is lagging so much even after restart so I checked the Task Manager and noticed that the Disk is at 100%.
  
• Found out that Avast premiere is causing the Disk to be at 100% so I End Task it
• Triggered CHKDSK upon startup in order to check if Disk is fine.
• Upon startup Check Disk ran but it is stuck at 12% even after almost 2 hours of waiting. So need to hard reboot. This persisted around 3 times
• Upon reboot Dell Diagnostics automatically kicked in since it detected that the system was not shut down properly. Result is that no problems found.
• After Dell Diagnostics, the system rebooted and now is stuck to the loading screen with the spinning dots.

Solutions that I tried:

• Used Media Installation Tool to do Startup repair. But result is that the Automatic startup repair cannot resolve the issue.
• Performed system restore to earlier date. The restore was successful but I am still stuck at the loading screen with spinning dots upon reboot.
• Startup Settings does not show in the Troubleshoot menu so activated the F8 to trigger safe mode. Upon selection of Safemode with network the system reboots and gets stuck in Dell logo screen.

Please advise. If possible I want to avoid losing my files.

Thanks!

 

Windows 10 installation stuck at blue logo(no spinning dots)


All,

I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)

My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)

Believe I have the minimum system requirement to install Windows 10?
After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX). But even then it doesnt move forward from the windows logo screen.
Please someone suggest, how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.
I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
Note:I havent used media creation tool here


To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg

Any help is appreciated to move this forward.

Thanks
Guhan