Windows 10: stuck on undoing changes and blue screen of death loop and need help on how to fix it.

this happend when i was downloading windows 11 as i was on windows 10 for a bit and while downloading my cord got knocked off my pc and it shut it all down. I know this is definitly the cause of it and why its doing this. i getting into safe mode with a number of options like shutting my pc on and off and using basically all the f10 keys as the f8 wasent working and i just could never seem to get into safe mode no matter what keys i pressed. i could however get into my bios which confused me there. i just need to know if i need to redowload windows from a usb or try and get into safe mode even

:)

 

Undoing Changes Loop

My computer is stuck in the "undoing changes loop" and will not boot at all. Keeps trying to boot then goes in a loop back to trying to open. I have tried powering off and on three times to get to the Advanced Repair with no success. Any suggestions on
on to fix this issue. Thank you

 

Blue Screen of Death...Driver stuck in an infinite loop..Please help

Again thanks for all your help your replies really helped me.. and appreciate all the work you guys are doing...

I followed your instructions ... my core maxed out initially at 850+ and memory around the same...

So i tried running it at 600 800... but it was too hot (90's and slowing down the FPS)
So i brought it down to 500 600... but the same response it was too hot... before it wasnt getting this hot. (90s) so i even tested it at its default setting 375 500 and its the same there... i started to get scared hoping i didnt do something bad to my card! i changed out drivers numerous reisntalled atitool... still the same...

So i decidied to run the max core test...
I get a blue screen of death at around 600... (850 was the previeous.)
And this is the error...

"Problem caused by NV4_disp"
"The device driver got stuck in an infinate loop. This usually indicates a problem w/ device driver, programing the hardware incorrectly"

I changed out the drivers used driver cleaner and all that and still getting the same blue screen... did it fry my gpu?

Any Ideas?

Thanks in advance

 

Getting blue screen of death loop

Windows 10 blue screen loop is an error that usually occurs when you are stuck in a Blue Screen of death reboot loop. It can be caused by a Windows Update, a device driver update or a recently installed hardware.

Please see our in-depth walk-through solutions below.

1. Uninstall corrupt driver

“Windows 10 blue screen loop” could be due to a newly installed driver. You may want to uninstall it using safe mode. Please see below to access safe mode.

2. Test Hardware

“Windows 10 blue screen loop” may also be due to faulty, semi-detached or dusty hardware. You may want to check the hardware one by one. If you recently installed new hardware, it could be the cause. Remove it and test.

3. Fix Master Boot Record (MBR) and Registry

“Windows 10 blue screen loop” may also occur due to a corrupt or missing registry. It may be caused by a conflict driver, accidentally changed or deleted registry or a third-party software malfunction.

4. Use Advance Option

“Windows 10 blue screen loop” may also occur if your Windows 10 has recently undergone Windows update that may not be compatible with the current hardware or drive which result to the blue screen of death loop. It could also be caused by a corrupt Windows update that is recently installed. Uninstalling Windows update or Reset Windows using the Advance Option may fix the looping problem.

5. Reinstall Windows

If all the components are in good condition, “Windows 10 blue screen loop,” could be caused by your Windows, which is unfixable. Reinstalling Windows may fix the error.