Windows 10: Sudden BSOD errors on Laptop after HDMI connection

Hi everyone,I've been having BSOD errors all of a sudden on my laptop Asus ROG Strix GL553VW /i5-6300HQ/8GB RAM/GTX 960MThe BSODs would occur randomly or when gaming with the stop codes 'IRQL_NOT_LESS_OR_EQUAL' and 'DRIVER_IRQL_NOT_LESS_OR_EQUAL', and my dump analysis programs indicate 'ntoskrnl.exe' and occasionally 'intelppm.sys' as the cause. Also, I'm seeing lots of artifacting and graphical distortions on the screen, and playing games causes the BSOD to appear soon after launch or just a crash to desktop. Sometimes the system will freeze up and be unrecoverable except with a hard reset.

:)

 

Laptop not recognizing TV through HDMI connection

Hello everyone!

First I do apologize if this is not the correct section for this thread.

I've had issues connecting my laptop to TV for the past day. Connection is done through an HDMI cable. Connection was good up until it randomly turned off itself while playing a game. There have been no hardware or software changes whatsoever that would affect it.

TV is SAMSUNG, Model: UE32J4000AW. Laptop info is available in My PC Specs. (laptop is brand new, week or two old)

Here's what I've tried so far:

• 3 different HDMI cables
• switching between ports on TV
• tried all projection options on Laptop
• Disable / Enable both Intel and Nvidia drivers
• Rollback Intel GPU driver and installed it back to latest version
• Re-installed Nvidia driver
• Restarted PC and TV
• Scan for hardware changes through Device Manager
• Checked Intel and Nvidia control panels - there were no available options
• Apparently both HDMI ports on the TV work as I tried them with a tv box.

I think that's all I've tried so far, will add anything else if missed. Open to suggestions.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Blue screen when I connect the TV HDMI cable to the laptop

Hi

I have a einwin 10 laptop and the moment i connect the HDMI cable from my TV, i get a bsod. All the drivers are up to date. Please suggest.