Windows 10: Sudden BSOD - Hardware Error 0x0000001e

No new hardware has been installed. Oracle VM VirtualBox was installed, and new BIOS firmware was updated. Apart from that, no other new software was installed. Windows has been updated, and other drivers are up to date.Recently, I have experienced multiple blue screen errors. Each time the computer restarts from a blue screen, it will blue screen again before it can work normally for a period of time. Additionally, there have been sudden reboots during idle periods.BSOD message:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e 0xffffffffc0000005, 0xfffff801415a95c8, 0x0

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD ! error 0x0000001e ! More info in thread


Hi, thank you for viewing thread and your time.

In the past 3 days I've been receiving a lot of BSOD.
Through some research I've used event viewer > bugcheck > and found multiple listings of " The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff803177345b5, 0x0000000000000000, 0x00007ff793590000). "

I have attached multiple dump files following the how to post BSOD thread tutorial.

Please let me know if there are any other information I can provide

Thank you!

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.