Windows 10: Surface Pro 4 “Problem resetting PC, no changes were made” during reinstall

When i attempt to install Windows 10 from a recovery drive i keep getting the error “Problem resetting PC. No changes were made” after 99%.

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Problem after trying to reinstall Win 10 on Microsoft Surface Pro 4

Hi all,

I have tried to reinstall Windows 10 on Microsoft Surface Pro 4 but when it gets to Getting finished near the end I get a dialog box saying Windows could not update the computer's boot configuration. Installation cannot proceed.
I then try the following:

1. Boot into your recovery USB and go to the CMD
2. type "diskpart" then "list disk"
3. select the internal drive: "select disk 0"
4. list volumes: "list vol" and select the boot volume (should be ~260MB): "select vol 1"
5. Then assign a drive letter to the partition: "assign letter=b:" 6.exit disk partition and "cd /d b:EFI\Microsoft\Boot"
6. run "bootrec /fixboot"
7. rename the BCD file "ren BCD BCD.bak"
8. recreate the BCD store: "bcdboot c:\Windows /l en-gb /s b: /f ALL
9. Reboot

When I get to step 6 I always get an Access is denied error.

Please advise how to resolve issue

I am using a Windows Surface Pro 4.

It should not be so complicated.

Thank you for all help.

 

Surface Pro 4

That's a strange one Shawn....clicking on your link shows them listed on my reply post and that I had already installed them.

Why they should want reinstalling I have no idea.