Windows 10: Surface Pro 7 / Windows 11 USB Driver Issue

I have a Samsung T3 portable SSD. The unencrypted partition 125Mb is the only recognised when I reboot while the drive is plugged in. Device manager indicates all is well at this point.I then eject the drive, the UAS entry in device manager is removed. When I re-plug it into the tablet, I get an error as shown below. The only way to resolve that is to reboot with the drive plugged in.When I unlock the drive using the Samsung software, it shuts the drive down and does not open into the unlocked partition. Normally, the File Explorer window shuts down and re-opens showing the encrypted drives

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

New Surface Pro 7+ Drivers and Firmware for Windows 10 - Jan. 20

Source: https://support.microsoft.com/en-us/...d-ae96f608c397

 

Boot Surface Laptop to USB - no Volume button

Hello Jimmy,

This doesn't list the "Surface Laptop", but you might give it a try to see.

*Arrow Boot Microsoft Surface from a USB device

Otherwise, you should be able to use OPTION ONE below to boot from the USB from advanced startup.

*Arrow Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials