Windows 10: Surface to custom built desktop

I purchased the Surface Laptop Version 1 x64 in 2016 with Win 10 preinstalled. I was previously using a Dell xps x64 running Win 7 pro and Office Pro 2016 included Access and Publisher off the shelf. I reinstalled the Office Pro 2016 on the Surface running Win 10 - no problems with software. I now have a desktop PC, custom built. The preinstalled software was only for the hardware. I transferred the Win 10 and Office 2016 to the new desktop via the Media Creation process. When I sign in to my Microsoft account my computer is still listed as the Surface Laptop. I want to make sure that wh

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

"Built-in administrator" still denied access to many apps and functions

Hi Andy,

• What is the exact error message you are getting when you try to open apps?

I understand your concern about accessing the operating system. I apologize for the inconvenience caused to you, I realize this may be frustrating. We are here to help you in resolving the issue.

This issue might have occurred due to corrupted system settings/ system files. Try the below troubleshooting steps and check if it helps.

Method 1: I suggest you to check if Built-in Administrator account is enabled. If so, try to disable.

Step 1: Follow the steps toDisable Built-in administrator.

• • Press Windows + X key together on your desktop screen.
    
  • Click on Command Prompt (admin) to open
    Command Prompt.
  • Type the following command and hit Enter:
  • net user administrator /active: no (Check for the spaces)
    

Restart the computer and check with the status of this issue.

Step 2: Also, I suggest you to refer to the below thread replied by
Marilyn O on November 22, 2012 as this suggestion has helped many others and check if it helps you as well.

App can't open with built in administrator account


Hope it helps. Get back to us with an updated status of this issue for further assistance.

 

Surface as peripheral of a desktop?

Thank you for your suggestion. In order for this to work (OneNote or other apps), do you still need to connect the Surface to the desktop? If yes, via USB? How is this working otherwise?