Windows 10: Sysprep cannot validate Windows installation

I am trying to upgrade my pc, and so I was trying to use sysprep. However, it encounters an error and tells me "Sysprep was not able to validate your Windows installation. The log has the following error lines:


2020-05-19 18:25:09, Error SYSPRP Package 89006A2E.AutodeskSketchBook_5.1.0.0_x64__tf1gferkr813w was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.

2020-05-19 18:25:09, Error SYSPRP Failed to remove apps for the current user: 0x80073cf2.

2020-05-19 18:25:09, Error SYSPRP Exit code of RemoveAllApps thread was 0x3cf2.

2020-05-19 18:25:09, Error SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll; dwRet = 0x3cf2
2020-05-19 18:25:09, Error SYSPRP SysprepSession::Validate: Error in validating actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0x3cf2
2020-05-19 18:25:09, Error SYSPRP RunPlatformActions:Failed while validating Sysprep session actions; dwRet = 0x3cf2
2020-05-19 18:25:09, Error [0x0f0070] SYSPRP RunDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x3cf2
2020-05-19 18:25:09, Error [0x0f00d8] SYSPRP WinMain:Hit failure while pre-validate sysprep generalize internal providers; hr = 0x80073cf2

:)

 

Sysprep not able to validate Windows 10 installation

Sysprep is not able to validate Windows 10 installation and refers to the setupact.log for information to resolve the issue.

setupact.log includes warning: Error from RegQqueryValueEx on value SysprepMode under key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep; dwRet - 0x2

What do I need to do to validate my Windows 10 installation?

 

Sysprep was not able to validate Your Windows installation. Windows 10 anniversary update

Hello.

I have a clean installed Windows 10 pro which was activated by MAK license.

When i tried prepare this system with Sysprep, i got the error message "Sysprep was not able to validate Your Windows installation. ...".

Internet research indicated that such errors happen when system was upgraded to Win 10 from earlier versions. In my case this is a clean installation of Win 10 pro with corporate activation on which i have performed the "anniversary update".

• May it happened because of this update? If so, did Microsoft released a patch/update to solve this issue (which i missed)? Is there exist any workaround to solve this issue?
  

• If "anniversary update" is not a cause, what would it be?
  

Thanks.

 

Sysprep was not able to validate your Windows installation (Win10 x64 1809)

Sysprep from Win10 x64 ver 1809 fails with an error message, and after checking 16 suggestions, I ask for assistance.

https://drive.google.com/open?id=1n_G7_9baHMNmhwWAWKUolW5T5NMnhAsf lists the 24 errors found in %WINDIR%\System32\Sysprep\Panther\setupact.log when I tried to install Windows 10 version 1809 on a new desktop machine, a PC which installs flawlessly with Windows 10 1709.

https://superuser.com/questions/1238880/sysprep-was-not-able-to-validate-windows-installation suggested four things which did not work:

a) reviewing the Remaining Windows rearm count w/ slmgr /dlv, which is 1000.

b) looking at https://support.microsoft.com/en-us...emove-or-update-windows-store-apps-that-inclu for provisioned M$ Store apps removed or updated. None were removed or updated.

c) Running a PowerShell command Get-AppxPackage -AllUser | Where PackageFullName -eq 89006A2E.AutodeskSketchBook_1.8.1.0_x64__tf1gferkr813w| Remove-AppxPackage -AllUsers did not help.

d) Removing default pre-installed Appx for all users as per https://www.thewindowsclub.com/erase-default-preinstalled-modern-apps-windows-8 with Powershell-as-admin commands Get-AppxPackage -AllUsers followed by 'Get-AppXProvisionedPackage -online | Remove-AppxProvisionedPackage -online` which did not help.

Windows 8.1 Enterprise Sysprep Error suggested other things I have not done above:

e) Don't upgrade. It's not an upgrade, it's a brand new install.

f) Delete any other user account, use only Administrator. There are no other accounts other than Administrator.

g) Don't update Modern apps. No Modern apps are updated. The LAN is disconnected during install to prevent this.

h) If you need to add any other settings please use the answer file settings. No other settings are added.

i) Delete the Registry item DWORD HKLM\SYSTEM\Setup\Upgrade. No such item found.

j) Delete folders c:\windows.old and the c:\Windows~BT. No such folders found.

k) Following a Reddit tip Sysprep was not able to validate your Windows installation : sysadmin, I checked C:\ProgramData\Microsoft\Windows\AppRepository\StateRepository-Machine.srd with sqlitebrowser3. No users who should not exist were found in the user and userpackage tables.

l) Sysprep was not able to validate your Windows installation suggested checking to make sure the OD was no labeled as an upgrade (even though it isn't an upgrade) but there was no REG_DWORD 'Upgrade' key found in the Registry at In the HKEY_LOCAL_MACHINE\SYSTEM\Setup\ node.

m) As per the suggestion of Origami below, I checked BitLocker with manage-bde -status . It was on, so I ran a PowerShell command as Administrator in another window Disable-Bitlocker –MountPoint ‘C:’ and kept checking with manage-bde -status in another window, until it showed C: was unencrypted. Then, also as per that suggestion, I followed http://computer-help-please.blogspot.com/2016/01/sysprep-error-windows-81-sysprep.html, and in Powershell opened as Administrator, ran Get-AppxPackage | Remove-AppxPackage then went to the Windows 10 Modern menu, selected every live tile, and marked them to turn them off. Also made sure the PC did not connect to a LAN, either Ethernet or WiFi. Made sure HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus values for cleanupstate and generalizationstate matched the image shown at http://computer-help-please.blogspot.com/2016/01/sysprep-error-windows-81-sysprep.html. Chose Sysprep again with Generalize selected, it rebooted, and it failed again, returning me to the Administrator screen.

FYI, the Modern apps menu shows several tiles with icons for Calendar, Mail, Xbox, Photos, Microsoft Store, Edge, Skype, OneNote, My Office, Movies and TV, Calculator, Groove Music, and Maps, whereas on the previous reboot all it showed was the down-arrow icon.

https://theitbros.com/sysprep-was-not-able-to-validate-your-windows-installation/ suggested two more approaches to investigate:

n) looking for Error SYSPRP Package SomeAppName_1.2.3.500_x64__8we4y23f8b4ws was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image. However, there are no other users at this point besides Administrator, and no other packages are iinstalled.

o) looking for Error 0x0f0036 SYSPRP spopk.dll:: Sysprep will not run on an upgraded OS. You can only run Sysprep on a custom (clean) install version of Windows. That error did not appear and this was a clean install.

Another relevant possibility was found at Sysprepping an offline Windows 10 system?

p) Bring up a Administrator's cmd prompt, go to the oobe folder and manually run msoobe. This runs through the OOBE and then it gets to "Just a moment..."; the throbber spins over over an hour before I killed it.

I eagerly await other suggestions on how to resolve this besides https://xkcd.com/2083 or .