Windows 10: System fail to boot please help

My system running with window 10 , latest version 1809 properly , but today early morning, system fail to boot, i tried every mathod - restore point , startup option, but nothing happened, in command prompt BOOT / FIXMBR

>>>>>>>>>>>>


FIXBOOT >>>>>Access is denied

:)

 

Failed to complete System Restore

Hello Passegua,

The error code 0x80070005 may indicate a few things that are causing System Restore Failure. It could be corrupted system files, conflict with other programs such as Anti-virus protection, and etc. As a first troubleshooting step, we suggest
that you perform System restore in Safe Mode. Kindly refer to this link for more information and steps.

Another step that I can suggest is Clean Boot, if the above step fails.

Let us know the outcome.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........